[access-uk] Re: Nod32

Hi

If you had chosen the expert Installation you would have been prompted about 
the Custom graphics option.  I have contacted eset to suggest this choice be 
made available in all installation modes which I think would make life 
easier for those of using access software.  However the situation can be 
rectified once the product has been installed as follows.  Not knowing what 
screen reader you use these instructions were originally written for a Hal 
user..  contact me if I can be of any further help.

So the first thing is to locate the NOd32 item in the System Tray.

From live mode locate NOd32 system tray.  You can use VF if you prefer.

which ever mode you're in, press space when NOD32 is highlighted.

This should take you into the NOD32 Control Centre.

Now we have to go into VF.

Locate NOd32 System Setup.

Press Insert. to perform a left mouse click.

Now exit vf back to live mode.

Press Control and Tab.

You should hear Hal say settings adjust parameters.

we now want to go back into VF.

Locate setup.

Press Insert once again. Performing a left mouse click once more.

You should be taken into live mode in a property sheet called general.

The first item should be use Eset custom graphic interface.  This box will
be checked. press space to deselect this.

Tab to OK and press enter.

Your screen reader should now follow the focus in NOd32's Control Centre.

Other related posts: