[access-uk] Re: Finereader

  • From: "James O'Dell" <jamesodell@xxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Fri, 1 Jul 2005 13:11:25 +0100

Hi Robert

Yes I did this, but it didn't work and it said that the menu option was unavailable. When I scan the same page with Text Bridge it seems to work.

I'm going to look at Text Cloner from
www.premier-programming.com.

James
----- Original Message ----- From: "Robert Stokes" <restokes@xxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, July 01, 2005 9:41 AM
Subject: [access-uk] Re: Finereader



Hi James,

After scanning with Ctrl+D try pressing Ctrl+3 to show the scanned text.

Good luck.

Robert.
----- Original Message ----- From: "James O'Dell" <jamesodell@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, June 30, 2005 5:05 PM
Subject: [access-uk] Finereader



Hi All

I'm trying the demo of Fine Reader. When I press the 'Scan and Read' hotkey (Control +D), it seems to scan, but I don't seem to be able to access the recognised text. If I use the Scan and read Wizard it seems to work, but I'd rather not go through all those options. any thoughts on what I'm doing wrong?

Thanks

James
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq




** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: