[access-uk] Re: Finereader
- From: "Robert Stokes" <restokes@xxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 1 Jul 2005 09:41:09 +0100
Hi James,
After scanning with Ctrl+D try pressing Ctrl+3 to show the scanned text.
Good luck.
Robert.
----- Original Message -----
From: "James O'Dell" <jamesodell@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, June 30, 2005 5:05 PM
Subject: [access-uk] Finereader
Hi All
I'm trying the demo of Fine Reader. When I press the 'Scan and Read'
hotkey (Control +D), it seems to scan, but I don't seem to be able to
access the recognised text. If I use the Scan and read Wizard it seems to
work, but I'd rather not go through all those options. any thoughts on
what I'm doing wrong?
Thanks
James
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
