[access-uk] Re: FineReader again

Marie - I don't seem to get prompted to connect the scanner, when installing 
it's software; the software for the Epsom 3170 installs without the scanner 
being connected, then when I connect it, the 'found new hardware' wizard 
pops up. - Andy
----- Original Message ----- 
From: "Marie BAISEZ" <marie.baisez@xxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, February 20, 2007 8:52 PM
Subject: [access-uk] Re: FineReader again


when you do, remember to only plug in the scanner and connect it to the pc
when prompted, not before, you probably know this, but I've been caught by
this quirk more than once.
Hope this helps a little.
Marie
----- Original Message ----- 
From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, February 20, 2007 7:12 PM
Subject: [access-uk] Re: FineReader again


> Thanks anyway, Amro - think I'll try reinstalling the scanner and see if
> that makes any difference. - Andy
> ----- Original Message ----- 
> From: "Amro Bilal" <amro_bilal@xxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Monday, February 19, 2007 9:56 PM
> Subject: [access-uk] Re: FineReader again
>
>
> I'm not sure I'm afraid, Andy. I use the try and buy FR 8.0 professional
> edition and haven't encounter any similar problems. Maybe you could try
> and
> run version 8 and see if things improve? Though it would be unfair on you
> to
> have to pay for an upgrade to sort your problem, specially that FR v7 was
> working ok on your system previously.
>
> Sorry I couldn't be much of a help.
>
> Amro
> ----- Original Message ----- 
> From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Sunday, February 18, 2007 9:30 PM
> Subject: [access-uk] Re: FineReader again
>
>
>> Hi Amro - There are 2 issues with this for me, the first is with
>> Finereader
>> 7, which when opened, causes JFW6.2 to unload, and/or my machine to
>> freeze;
>> I say and/or, as the problem is not consistent, sometimes after waiting
>> for
>> a minute or so, and using a hot key, I can get JFW back talking again, at
>> other times, the PC freezes, and I have to re-boot.
>>
>> The second problem is that on those occasions when I can get JFW back
>> talking again, and I have FR7 open, and try to do a scan, using the
>> FineReader interface, I get a message saying that Epsom 3170 scan
>> couldn't
>> be started, going on to ask if I want to open the trouble shooter; the
>> trouble shooter doesn't seem to have a topic that answers this problem,
>> so
>> it looks as if there's a setting I need to change under the scanning tab
>> for
>> my Epsom 3170 to work with FR.
>>
>> Hope this makes some kind of sense? Can you shed any further light on
>> what
>> needs to be done?
>>
>> Thanks - Andy
>> ----- Original Message ----- 
>> From: "Amro Bilal" <amro_bilal@xxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Sunday, February 18, 2007 7:54 PM
>> Subject: [access-uk] Re: FineReader again
>>
>>
>> Hi Andy,
>>
>> I didn't need to change anything with Fine Reader to use it with Jaws.
>> What
>> is it that you're not happy with?
>>
>> Cheers,
>> Amro
>> ----- Original Message ----- 
>> From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Saturday, February 17, 2007 2:40 PM
>> Subject: [access-uk] FineReader again
>>
>>
>>> Hi all - thought I'd ask again as nobody has come back on this one. I
>>> need
>>> to know how to set up Finereader to work best with JFW 6.2; can't seem
>>> to
>>> figure it out!
>>>
>>> Thanks - Andy
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>> --
>> This email has been verified as Virus free
>> Virus Protection and more available at http://www.plus.net
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> --
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> __________ NOD32 2072 (20070220) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


--
This email has been verified as Virus free
Virus Protection and more available at http://www.plus.net 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: