[access-uk] Re: Finding out your IP address

Before this gets silly, here is a direct quote from Linksys's own web
page FAQ on Routers to the question, "How do I access the router's
web-based setup page?"

Step 1:
Open a web browser such as Internet Explorer.

Step 2:
Go to the Address bar and enter your router's IP address
("192.168.1.1" is the default IP of most Linksys routers) then press
[Enter].

George.


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf Of john coley
Sent: 04 April 2009 17:51
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Finding out your IP address

Steve, you're missing two digits. It is 192.168.100.1.
                    John.

----- Original Message ----- 
From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, April 04, 2009 5:26 PM
Subject: [access-uk] Re: Finding out your IP address


> Hi,
>
> No typo, Chris said what do Linksys use, and I had already stated
that it
> was 192.168.1.1.  Where's the typo?  Never mind.
>
> All the best
>
> Steve
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf 
> Of
> Amro Bilal
> Sent: Saturday 4 April 2009 15:27
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: Finding out your IP address
>
> Hi Steve,
>
> You wrote "Except Linksys routers, they usually are 192.168.1.1"
>
> Then in a following message to Chris you wrote "So you didn't read
the 
> whole
>
> message. Linksys routers use 192.168.1.1"
>
> Is it me or there's a typo in there? The IP address is the same in
both
> messages and it's what most routers use. Just curious...
>
> Cheers,
> Amro
> ----- Original Message ----- 
> From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, April 04, 2009 12:35 PM
> Subject: [access-uk] Re: Finding out your IP address
>
>
>> Hi Chris,
>>
>> So you didn't read the whole message. Linksys routers use
192.168.1.1.
>>
>> All the best
>>
>> Steve
>>
>> -----Original Message-----
>> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf
>> Of
>> Chris Hallsworth
>> Sent: Friday 3 April 2009 20:07
>> To: access-uk@xxxxxxxxxxxxx
>> Subject: [access-uk] Re: Finding out your IP address
>>
>> What do Linksys routers use then?
>>
>> --
>> Chris Hallsworth
>> e-mail: christopherh40@xxxxxxxxxxxxxx
>> MSN: ch9675@xxxxxxxxxxx
>> Skype: chrishallsworth7266
>> ----- Original Message ----- 
>> From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Friday, April 03, 2009 7:30 PM
>> Subject: [access-uk] Re: Finding out your IP address
>>
>>
>> Hi Chris,
>>
>> Except Linksys routers, they usually are 192.168.1.1.
>>
>> All the best
>>
>> Steve
>>
>> -----Original Message-----
>> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf
>> Of
>> Chris Hallsworth
>> Sent: Friday 3 April 2009 17:54
>> To: access-uk@xxxxxxxxxxxxx
>> Subject: [access-uk] Re: Finding out your IP address
>>
>> Hi, a router is usually assigned an IP address of 192.168.0.x,
where x is
>> from 1 to 255, usually 1. So try 192.168.0.1, for example.
>>
>> --
>> Chris Hallsworth
>> e-mail: christopherh40@xxxxxxxxxxxxxx
>> MSN: ch9675@xxxxxxxxxxx
>> Skype: chrishallsworth7266
>> ----- Original Message ----- 
>> From: "Balal Hussain" <balal@xxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Friday, April 03, 2009 4:50 PM
>> Subject: [access-uk] Finding out your IP address
>>
>>
>> Hello list. does anyone know how to find your IP address? I kneed
some
>> help
>> logging in to my router, and dont know how to login.
>> Kind regards Balal Hussain
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> __________ Information from ESET Smart Security, version of virus
>> signature database 3987 (20090404) __________
>>
>> The message was checked by ESET Smart Security.
>>
>> http://www.eset.com
>>
>>
>>
>
>
> __________ Information from ESET Smart Security, version of virus 
> signature
> database 3987 (20090404) __________
>
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> 


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: