[access-uk] Re: Digital switch-over help
- From: william lomas <will.d.lomas@xxxxxxxxx>
- To: access-uk@xxxxxxxxxxxxx
- Date: Fri, 4 May 2012 09:43:14 +0100
hi
to answer the question …
I think that from reading the instructions, the tv should in theory, find the
freeview box, I know my portset and goodmans did without any difficulties.
I think if you press the AV button is it on the tv remote not the freeview one,
it searches for the box in question.
Sure others will chime in
On 4 May 2012, at 09:30, Jackie Cairns wrote:
> Everyone,
>
> I have contacted the BBC switch-over team who sent me a letter this week
> because Northern Ireland is turning off its analogue signal in October.
>
> My letter stated that they can provide an accessible recordable digital
> source so I thought of the new box that RNIB now have on sale.
>
> The switch-over team can come and install the new box, fully up and running,
> with one year after-care, for the sum of £186. There is a waiting list for
> this to be done here, however, so my question, as well as passing on this
> information, is: how easy is it to set up this new box on a TV with Freeview
> built-in, is HD ready, and has an ordinary Sky DigiBox with the FreeSat card
> installed? We have a digital roof aerial installed already, so are
> basically fit to go. But it seems to me that it shouldn't be that difficult
> to install the box ourselves if we go ahead and purchase from RNIB.
>
> Thoughts welcome please, but no negativity if you don't mind William!
> (sigh).
>
> Kind Regards,
>
> Jackie Cairns
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
