[access-uk] Re: DVD Audio extractor and audio description?
- From: "martin wilsher" <martinwilsher@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 7 Nov 2010 15:01:24 -0000
Ok, I'll have a go at that. It's a bit confusing all this *smile*
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
ANDY COLLINS
Sent: 07 November 2010 14:56
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: DVD Audio extractor and audio description?
Insert the DVD in your drive and then open the Audio Extractor programme.
Use your tab key to cycle through the options, you should see things like
the drive where the DVD is, a help button, a stop button, a refresh button
etc. You will also find using the tab key, a list of the titles and chapters
on the DVD, that you can check and uncheck for listening to, or converting,.
The tab after this is for language, use your arrow keys to select English,
then tab across to the play button, and click it to see if the selected
English version is the one with the AD, if not, go back and choose another
English language option.
HTH -
Andy
----- Original Message -----
From: "martin wilsher" <martinwilsher@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, November 07, 2010 2:41 PM
Subject: [access-uk] Re: DVD Audio extractor and audio description?
> Where is the language tab?
>
> Thanks. I can't find any tabs at all in DVD audio extractor.
>
>
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
> Of
> ANDY COLLINS
> Sent: 06 November 2010 17:03
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: DVD Audio extractor and audio description?
>
> Hi Martin -
>
> Yes this can be done.
>
> Haven't done it for ages, so can't recall the steps off hand, but you will
> need to use the language tab from within Audio Extractor. Don't suppose
> this
> has change in recent updates of the software, so you will need to choose
> English under that language tab, and then go to the play button, and check
> it for the AD version, if AD isn't there, and you know it is on the disk,
> go
> back to the language tab, and select another version of English, and test
> it
> again with the play button. I have some DVDs that have 3 entries of
> English
> under the language tab , one being the standard movie, another being the
> producer's commentary, and the third being the one with AD, so just play
> around, and I'm sure you'll figure it out.
>
> Good luck -
>
> Andy
> ----- Original Message -----
> From: "martin wilsher" <martinwilsher@xxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, November 06, 2010 4:14 PM
> Subject: [access-uk] DVD Audio extractor and audio description?
>
>
>> Hi all.
>>
>> Is it possible to rip a DVD with audio descript on it using audio
>> extractor?
>> Or does it just take the top layer as it were, the un described video?
>> Thanks. If it is possible to rip audio description along with the
>> original
>> audio, how does one go about it using DVD audio extractor from computer
>> application studios? Thanks.
>>
>> Hope to hear from you soon.
>>
>>
>>
>> From Martin.
>>
>>
>>
>> Please email me at:
>>
>>
>>
>> m.wilsher@xxxxxxxxxxxxxxx
>>
>>
>>
>>
>>
>> Or contact me using skype from
>>
>>
>>
>> www.skype.com
>>
>>
>>
>> my skype name is dobbinequine
>>
>>
>>
>> twitter name is BigPawedBear.
>>
>> http://twitter.com/BigPawedBear
>>
>> Thanks
>>
>>
>>
>> Please visit my website:
>>
>>
>>
>> www.martin-wilsher.co.uk
>>
>>
>>
>>
>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
