[access-uk] Re: Corection to last message, (was RE: Re: Off topic, Nokia query.

Hi Jim. Yes, edit your profile, and select the tone you've just saved.
Incidentally as far as I can remember, it doesn't matter where on your phone
you put a tone. It always seems to show up when you come to edit your
profile. At least this is the case with the 6600, and 30.

Cheers,

Mark

Mark Matthews
Cardiff, Wales, UK
E-mail: mark.matthews53@xxxxxxxxxxxx
MSN/Windows Messenger:markmatthews3@xxxxxxxxxxx
Skype: mmatthews1981
Webpage:http://www.qsl.net/gw0wgk 

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
jim
Sent: Friday, October 28, 2005 7:22 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Corection to last message, (was RE: Re: Off topic,
Nokia query.


Hi Mark,

I've managed to get the ring tone into the tones folder, but I'm totally 
stuck from there. Do I go into the personel profiles folder and do some work

in there to make it my ring tone? Thanks for your help.
Jim.

----- Original Message ----- 
From: "Mark Matthews" <mark.matthews53@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, October 28, 2005 6:53 PM
Subject: [access-uk] Corection to last message, (was RE: Re: Off topic, 
Nokia query.


> Hi jim.
>
> The last bit of my message was incorrect. Whilst you can sellect the 
> file via the Profiles menu, its indeed a lot easier to browse to it 
> via the file manager, and to set it as the ring tone then. This should 
> automatically apply the change to your active profile.
>
> Cheers,
>
> Mark
>
> Mark Matthews
> Cardiff, Wales, UK
> E-mail: mark.matthews53@xxxxxxxxxxxx
> MSN/Windows Messenger:markmatthews3@xxxxxxxxxxx
> Skype: mmatthews1981
> Webpage:http://www.qsl.net/gw0wgk
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On 
> Behalf
> Of
> Mark Matthews
> Sent: Friday, October 28, 2005 6:41 PM
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: Off topic, Nokia query.
>
>
> Hi Jim.
>
> Open the message as normal. If the file doesn't play automatically 
> (which
> I
> don't think it does), press 'Options, and Open Presentation. From here, 
> your
> phone's player should launch, and you should here the file. Press options
> again, and Browse to save. I think you'll find its pretty much
> self-explanatory from here on. You then need to edit the profile you want 
> to
> set the file as a ring tone for.
>
> Note that some of the Phrasings of the above menus might be slightly 
> different, as it's a long time since I've saved a file via SMS. HTH.
>
> Cheers,
>
> Mark
>
> Mark Matthews
> Cardiff, Wales, UK
> E-mail: mark.matthews53@xxxxxxxxxxxx
> MSN/Windows Messenger:markmatthews3@xxxxxxxxxxx
> Skype: mmatthews1981
> Webpage:http://www.qsl.net/gw0wgk
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On 
> Behalf
> Of
> jim
> Sent: Friday, October 28, 2005 6:24 PM
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Off topic, Nokia query.
>
>
> HI all,
> Sorry for the off topic posting, but the talks list is too heavy in
> traffic
> just to ask one question, that someone on this list may be able to answer.
>
> I have a Nokia 6260 flip phone. A friend has sent me a ring tone that 
> I would like to use, but the ring tone is in my in box and I can't 
> find a way of moving it to the folder where the ring tones are stored. 
> Does anyone know
>
> how to accomplish this  task and move the file to the relevant folder 
> and start to use it as a ring tone?  I'm using talks.
>
> Thanks in advance for any help.
>
> Jim.
>
> MSN Address
> jim.doc@xxxxxxxxxxxx
>
> SKYPE Address
> jimdoc
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: