[access-uk] Re: Contacts

I have made the same mistake myself so am still learning too. What is more the 
data is abbreviated somewhat. Do not do it that way. Do you have phone switch? 
Turn on bluetooth on both phones. This will be in tools and then you might have 
to go in to communications to find bluetooth. Also within tools then go to 
communications. you should find  then press options within phone switch. phone 
switch. Go in to phone switch on the phone that you want the contacts. Then you 
will have the option to transfer all data or just your contacts. Select 
contacts. It will then start to transfer over. You will have to listen to what 
each phone is saying because you will be asked if you want to accept the 
contacts via bluetooth and you will have to say yes by pressing soft key one on 
your new phone. Do not forget to turn off bluetooth on both phones when you are 
done. Actually also what I did to avoid duplication on the new phone was that I 
highlighted all the contacts there by using select all and then I deleted them 
so I was starting on a clean sheet so to speak.
Eleanor

-original message-
Subject: [access-uk] Contacts
From: "Phil P Roberts" <philproberts@xxxxxxxxxxx>
Date: 30/05/2009 6:45 AM

Hi List 

I have recently moved from a Nokia 6600 to a nolia N82.  When I swapped my SIM 
card to my new hone it only carried 81 out of 248 contacts.  

I have put the card back in my old phone where it states there are 248 
contacts, copied to SIM with the same outcome when replacing in my new phone.

Can anyone help me retreive my missing contacts please? 

Phil Roberts

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: