[access-uk] Re: Announcement: New version of Beyo CBS Reader

Hi Gordon,

Yes, if you have some time left, you can.

Also, the shutter is handled automatically on the N95-8.

Finally, make sure that either you have good lighting, or flash is set to
auto or on in settings.

All the best

Steve

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
G. McFarlane
Sent: Tuesday 5 January 2010 02:21
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Announcement: New version of Beyo CBS Reader

Hi
I gave up with the N95 8gb version. I could get the bleeps to work but never

seemed to get anything read. My only thought was that perhaps I needed to 
open the shutter, but I think this is automatic in the N95 8gb. It would be 
great if it would work - has anyone had any success on this phone?
Also I've just installed the new firmware for this phone. Can I reinstall 
the reader and take advantage of the trial period?
Gordon McFarlane
----- Original Message ----- 
From: "Ibrahim Gucukoglu" <ibrahim_gucukoglu@xxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Monday, January 04, 2010 8:46 PM
Subject: [access-uk] Re: Announcement: New version of Beyo CBS Reader


> Hi.
>
> The E71, N82, N95 8GB version, the N86 and there should be no reason why 
> it won't work with the N79 and 6220 classic.
>
> All the best, Ibrahim.
> ----- Original Message ----- 
> From: "Francis Holman" <franholman755@xxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Monday, January 04, 2010 5:07 PM
> Subject: [access-uk] Re: Announcement: New version of Beyo CBS Reader
>
>
>> which phones does it work with?
>> ----- Original Message ----- 
>> From: "john gallagher" <john@xxxxxxxxxxxxxxxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Sunday, January 03, 2010 7:51 PM
>> Subject: [access-uk] Re: Announcement: New version of Beyo CBS Reader
>>
>>
>>> thanks there i thought so. a shame as it sounds a very good cheap ocr 
>>> program.
>>>
>>> ----- source message -----
>>> from: "Ibrahim Gucukoglu" <ibrahim_gucukoglu@xxxxxxxx>
>>> to: <access-uk@xxxxxxxxxxxxx>
>>> date: 2010/01/03 19:18:10
>>> subject: [access-uk] Re: Announcement: New version of Beyo CBS Reader
>>>
>>>>
>>>>
>>>> Hi.
>>>>
>>>> No, the E65 is not supported by BeyoCBS reader.
>>>>
>>>> All the best, Ibrahim.
>>>> ----- Original Message ----- 
>>>> From: "john gallagher" <john@xxxxxxxxxxxxxxxxxxxxxxx>
>>>> To: <access-uk@xxxxxxxxxxxxx>
>>>> Sent: Sunday, January 03, 2010 7:04 PM
>>>> Subject: [access-uk] Re: Announcement: New version of Beyo CBS Reader
>>>>
>>>>
>>>> > hi steve do you know if this will work on the e 65 i did try it on 
>>>> > the
>>>> > last version but memory dificulties do not let the program run.
>>>> >
>>>> > ----- source message -----
>>>> > from: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
>>>> > to: <updates@xxxxxxxxxxxxxx>, <access-uk@xxxxxxxxxxxxx>,
>>>> > <bcab@xxxxxxxxxxxxx>, <talks-uk@xxxxxxxxxxxxx>
>>>> > date: 2010/01/03 15:16:42
>>>> > subject: [access-uk] Announcement: New version of Beyo CBS Reader
>>>> >
>>>> >ar
>>>> >ar
>>>> >ar Hi Folks,
>>>> >ar
>>>> >ar There is a new version of the Beyo CBS reader, version 1.4.3. 
>>>> >Changes
>>>> >ar are
>>>> >ar mainly performance improvements, but also flip detection, so now it
>>>> >ar doesn't
>>>> >ar matter if print is upside down, and also correct orientation of the

>>>> >arrow
>>>> >ar keys if portrait or landscape are selected in settings.
>>>> >ar
>>>> >ar Download the complete archive here:-
>>>> >ar
>>>> >ar http://www.comproom.co.uk/beyocbs/beyocbs.zip
>>>> >ar
>>>> >ar People who have purchased may just install over the top of their 
>>>> >existing
>>>> >ar copy.
>>>> >ar
>>>> >ar Thanks.
>>>> >ar
>>>> >ar All the best
>>>> >ar
>>>> >ar Steve
>>>> >ar
>>>> >ar
>>>> >ar inin* To leave the list, click on the immediately-following link:-
>>>> >ar inin* [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> >ar inin* If this link doesn't work then send a message to:
>>>> >ar inin* access-uk-request@xxxxxxxxxxxxx
>>>> >ar inin* and in the Subject line type
>>>> >ar inin* unsubscribe
>>>> >ar inin* For other list commands such as vacation mode, click on the
>>>> >ar inin* immediately-following link:-
>>>> >ar inin* [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>> >ar inin* or send a message, to
>>>> >ar inin* access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>> > inin* To leave the list, click on the immediately-following link:-
>>>> > inin* [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> > inin* If this link doesn't work then send a message to:
>>>> > inin* access-uk-request@xxxxxxxxxxxxx
>>>> > inin* and in the Subject line type
>>>> > inin* unsubscribe
>>>> > inin* For other list commands such as vacation mode, click on the
>>>> > inin* immediately-following link:-
>>>> > inin* [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>> > inin* or send a message, to
>>>> > inin* access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>> >
>>>> >
>>>> >
>>>> > __________ Information from ESET Smart Security, version of virus
>>>> > signature database 4740 (20100103) __________
>>>> >
>>>> > The message was checked by ESET Smart Security.
>>>> >
>>>> > http://www.eset.com
>>>> >
>>>> >
>>>> >
>>>>
>>>>
>>>> __________ Information from ESET Smart Security, version of virus 
>>>> signature database 4740 (20100103) __________
>>>>
>>>> The message was checked by ESET Smart Security.
>>>>
>>>> http://www.eset.com
>>>>
>>>>
>>>>
>>>> inin* To leave the list, click on the immediately-following link:-
>>>> inin* [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> inin* If this link doesn't work then send a message to:
>>>> inin* access-uk-request@xxxxxxxxxxxxx
>>>> inin* and in the Subject line type
>>>> inin* unsubscribe
>>>> inin* For other list commands such as vacation mode, click on the
>>>> inin* immediately-following link:-
>>>> inin* [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>> inin* or send a message, to
>>>> inin* access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: