Hi Petter, You are confused. Talks followed by 1 changes keyboard echo, not words and letters in text mode. So Talks 1 says Key Ech os letters or words. Talks 2, as you say, changes reading of case. However, Talks then hold down 2 for about a second, will change the cursor reading mode in text messages etc. All the best Steve -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Peter Beasley Sent: 10 January 2008 19:00 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... Talks followed by 2 changes from upper case or lower case. ----- Original Message ----- From: "Jackie Cairns" <cairnsplace@xxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Thursday, January 10, 2008 6:52 PM Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... > Really? It's always been TALKS key followed by digit two on mine before > the latest upgrade and today. How interesting (smile). > > Jackie > ----- Original Message ----- > From: "Peter Beasley" <p.beasley@xxxxxxxxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Thursday, January 10, 2008 6:44 PM > Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... > > >> Actually, on my 6600 it is talks key followed by 1 to toggle between >> letters, words, and letters and words. >> ----- Original Message ----- >> From: "Jackie Cairns" <cairnsplace@xxxxxxx> >> To: <access-uk@xxxxxxxxxxxxx> >> Sent: Thursday, January 10, 2008 5:54 PM >> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >> >> >>> Hi Carol >>> >>> If you follow this sequence, see what happens: >>> >>> TALKS key then long press of number 2, original. TALKS key then long >>> press of number 2, letters. TALKS key then long press of number 2, >>> words. If it isn't happening then it's weird because all the phones I've >>> ever seen do it with whatever version. >>> >>> Good luck. >>> >>> Jackie >>> ----- Original Message ----- >>> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> >>> To: <access-uk@xxxxxxxxxxxxx> >>> Sent: Thursday, January 10, 2008 5:41 PM >>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>> >>> >>>> Jackie, >>>> >>>> The only way I can cycle through the options is to press the Talks key >>>> each time. If I try to do it as I think you're describing - Talks, >>>> then hold down the figure 1 key for a few seconds - nothing happens for >>>> about four or five seconds and then I end up in Help. >>>> >>>> Additionally, when I've changed the setting to letters, I still can't >>>> move through the text letter by letter to read this phone number. >>>> Never have sussed this one. Perhaps I do need to upgrade ... >>>> >>>> -- >>>> Carol >>>> carol.pearson@xxxxxxxxxxxx >>>> >>>> >>>> ----- Original Message ----- >>>> From: "Jackie Cairns" <cairnsplace@xxxxxxx> >>>> To: <access-uk@xxxxxxxxxxxxx> >>>> Sent: Thursday, January 10, 2008 11:54 AM >>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>>> >>>> >>>>> Carol, are you pressing the TALKS key, letting it go, then holding >>>>> down digit 2 for a few seconds until it says original? Then do the >>>>> same to get letters, then the same again to get words, or whichever is >>>>> your preference. >>>>> >>>>> Any better? (smiles). >>>>> >>>>> Jackie >>>>> ----- Original Message ----- >>>>> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> >>>>> To: <access-uk@xxxxxxxxxxxxx> >>>>> Sent: Thursday, January 10, 2008 11:50 AM >>>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>>>> >>>>> >>>>>> Thanks, Jackie. I'm cycling through the various modes, but perhaps >>>>>> I'm not holding the No 2 key down long enough or something. ... >>>>>> >>>>>> -- >>>>>> Carol >>>>>> carol.pearson@xxxxxxxxxxxx >>>>>> >>>>>> >>>>>> ----- Original Message ----- >>>>>> From: "Jackie Cairns" <cairnsplace@xxxxxxx> >>>>>> To: <access-uk@xxxxxxxxxxxxx> >>>>>> Sent: Thursday, January 10, 2008 11:17 AM >>>>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>>>>> >>>>>> >>>>>>> Carol, we still have a 6600 that I use to teach people how to text. >>>>>>> I had the version you are currently running, and was still able to >>>>>>> press the TALKS key, then hold down the number 2 digit for a couple >>>>>>> of seconds. It allowed me to cycle through original, letters and >>>>>>> word modes. I upgraded mine for £50. It was worth it as it gave me >>>>>>> Braille support (not that I have a display), and made the phone run >>>>>>> faster. >>>>>>> >>>>>>> Hope that helps. >>>>>>> >>>>>>> Jackie >>>>>>> ----- Original Message ----- >>>>>>> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> >>>>>>> To: <access-uk@xxxxxxxxxxxxx> >>>>>>> Sent: Wednesday, January 09, 2008 9:44 PM >>>>>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>>>>>> >>>>>>> >>>>>>>> Jackie, >>>>>>>> >>>>>>>> I couldn't get the individual letters up, though I had already done >>>>>>>> what you suggest. >>>>>>>> >>>>>>>> Perhaps I do need to update my TALKS. >>>>>>>> >>>>>>>> Thanks anyway. Will bear it all in mind ... >>>>>>>> >>>>>>>> No doubt I'll get there soon. >>>>>>>> >>>>>>>> -- >>>>>>>> Carol >>>>>>>> carol.pearson@xxxxxxxxxxxx >>>>>>>> >>>>>>>> >>>>>>>> ----- Original Message ----- >>>>>>>> From: "Jackie Cairns" <cairnsplace@xxxxxxx> >>>>>>>> To: <access-uk@xxxxxxxxxxxxx> >>>>>>>> Sent: Wednesday, January 09, 2008 2:27 PM >>>>>>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>>>>>>> >>>>>>>> >>>>>>>>> Hi Carol >>>>>>>>> >>>>>>>>> I'll do my best, but Steve will doubtless chip in and help you out >>>>>>>>> as well. >>>>>>>>> >>>>>>>>> I think your 6630 is a phone supporting TALKS second edition. If >>>>>>>>> this is so, you can go to >>>>>>>>> www.comproom.co.uk >>>>>>>>> and find the link to download the second edition. >>>>>>>>> >>>>>>>>> I don't know your phone, so couldn't say for certain how you would >>>>>>>>> put it on there. If you want TALKS to allow you to cursor through >>>>>>>>> numbers and letters one digit or character at a time, press the >>>>>>>>> TALKS key followed by a long press of the number two digit. You >>>>>>>>> can cycle through original, letters or word modes. Letters is >>>>>>>>> best. >>>>>>>>> >>>>>>>>> If you want to add a contact to your phone book, within their >>>>>>>>> message, bring up the menu and go to add recipient to contact. >>>>>>>>> You then get the choice of updating an existing contact, or >>>>>>>>> creating a new one, where you can fill in the fields with their >>>>>>>>> name etc. >>>>>>>>> >>>>>>>>> I hope this is enough to get you going, and that others will chip >>>>>>>>> in too. >>>>>>>>> >>>>>>>>> Jackie >>>>>>>>> If you want >>>>>>>>> ----- Original Message ----- >>>>>>>>> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> >>>>>>>>> To: "Access UK Mailing List" <access-uk@xxxxxxxxxxxxx> >>>>>>>>> Sent: Wednesday, January 09, 2008 2:11 PM >>>>>>>>> Subject: [access-uk] A FEW TALKS QUESTIONS ... >>>>>>>>> >>>>>>>>> >>>>>>>>>> Hi all, >>>>>>>>>> >>>>>>>>>> I haven't upgraded my Talks for ages and can't locate my version >>>>>>>>>> number. (Sure it's easy, but ...) What's the latest version for >>>>>>>>>> my 6630, please, and from where is it obtained? No, I can't >>>>>>>>>> remember how to install either. >>>>>>>>>> >>>>>>>>>> I've decided to upgrade to the latest version as I haven't done >>>>>>>>>> so for ages and couldn't find a way to read a telephone number >>>>>>>>>> put within a message and copy it to my contacts. Can this be >>>>>>>>>> done? (I can't remember all of the number to type it in by hand >>>>>>>>>> and am therefore hoping I can copy, somehow) or read just the >>>>>>>>>> number, which I also seem unable to do. >>>>>>>>>> >>>>>>>>>> Any help, as always, much appreciated. Thanks bunches! >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Carol >>>>>>>>>> carol.pearson@xxxxxxxxxxxx >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>>>>> ** If this link doesn't work then send a message to: >>>>>>>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>>>>>>> ** and in the Subject line type >>>>>>>>>> ** unsubscribe >>>>>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>>>>> ** immediately-following link:- >>>>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>>>>>>> ** or send a message, to >>>>>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>>>>>> >>>>>>>>> >>>>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>>>> ** If this link doesn't work then send a message to: >>>>>>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>>>>>> ** and in the Subject line type >>>>>>>>> ** unsubscribe >>>>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>>>> ** immediately-following link:- >>>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>>>>>> ** or send a message, to >>>>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>>>>> >>>>>>>> >>>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>>> ** If this link doesn't work then send a message to: >>>>>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>>>>> ** and in the Subject line type >>>>>>>> ** unsubscribe >>>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>>> ** immediately-following link:- >>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>>>>> ** or send a message, to >>>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>> ** If this link doesn't work then send a message to: >>>>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>>>> ** and in the Subject line type >>>>>>> ** unsubscribe >>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>> ** immediately-following link:- >>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>>>> ** or send a message, to >>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>>> >>>>>> >>>>>> ** To leave the list, click on the immediately-following link:- >>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>> ** If this link doesn't work then send a message to: >>>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>>> ** and in the Subject line type >>>>>> ** unsubscribe >>>>>> ** For other list commands such as vacation mode, click on the >>>>>> ** immediately-following link:- >>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>>> ** or send a message, to >>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>> >>>>> >>>>> ** To leave the list, click on the immediately-following link:- >>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>> ** If this link doesn't work then send a message to: >>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>> ** and in the Subject line type >>>>> ** unsubscribe >>>>> ** For other list commands such as vacation mode, click on the >>>>> ** immediately-following link:- >>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>> ** or send a message, to >>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>> >>>> >>>> ** To leave the list, click on the immediately-following link:- >>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>> ** If this link doesn't work then send a message to: >>>> ** access-uk-request@xxxxxxxxxxxxx >>>> ** and in the Subject line type >>>> ** unsubscribe >>>> ** For other list commands such as vacation mode, click on the >>>> ** immediately-following link:- >>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>> ** or send a message, to >>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>> >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >>> >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq