[access-uk] Re: A FEW TALKS QUESTIONS ...

Hi Carol,

If it is easier, do it this way.  Press Talks Star on V2, changed to Talks
Menu on V3, to get into Talks itself.  Now right arrow over to Advanced.
Now arrow down to Cursor Mode, press the centre of the joystick to select
it, and change it to letters with the up and down arrows and select it.  Now
back out of Talks, and it should stay in letter mode.

All the best

Steve

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Carol Pearson
Sent: 10 January 2008 17:42
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...

Jackie,

The only way I can cycle through the options is to press the Talks key each
time.  If I try to do it as I think you're describing - Talks, then hold
down the figure 1 key for a few seconds - nothing happens for about four or
five seconds and then I end up in Help.

Additionally, when I've changed the setting to letters, I still can't move
through the text letter by letter to read this phone number.  Never have
sussed this one.  Perhaps I do need to upgrade ...

--
Carol
carol.pearson@xxxxxxxxxxxx


----- Original Message -----
From: "Jackie Cairns" <cairnsplace@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, January 10, 2008 11:54 AM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


> Carol, are you pressing the TALKS key, letting it go, then holding down 
> digit 2 for a few seconds until it says original?  Then do the same to get

> letters, then the same again to get words, or whichever is your 
> preference.
>
> Any better?  (smiles).
>
> Jackie
> ----- Original Message ----- 
> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Thursday, January 10, 2008 11:50 AM
> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...
>
>
>> Thanks, Jackie.  I'm cycling through the various modes, but perhaps I'm 
>> not holding the No 2 key down long enough or something.  ...
>>
>> --
>> Carol
>> carol.pearson@xxxxxxxxxxxx
>>
>>
>> ----- Original Message ----- 
>> From: "Jackie Cairns" <cairnsplace@xxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Thursday, January 10, 2008 11:17 AM
>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...
>>
>>
>>> Carol, we still have a 6600 that I use to teach people how to text.  I 
>>> had the version you are currently running, and was still able to press 
>>> the TALKS key, then hold down the number 2 digit for a couple of 
>>> seconds. It allowed me to cycle through original, letters and word 
>>> modes.  I upgraded mine for £50.  It was worth it as it gave me Braille 
>>> support (not that I have a display), and made the phone run faster.
>>>
>>> Hope that helps.
>>>
>>> Jackie
>>> ----- Original Message ----- 
>>> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
>>> To: <access-uk@xxxxxxxxxxxxx>
>>> Sent: Wednesday, January 09, 2008 9:44 PM
>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...
>>>
>>>
>>>> Jackie,
>>>>
>>>> I couldn't get the individual letters up, though I had already done 
>>>> what you suggest.
>>>>
>>>> Perhaps I do need to update my TALKS.
>>>>
>>>> Thanks anyway.  Will bear it all in mind ...
>>>>
>>>> No doubt I'll get there soon.
>>>>
>>>> --
>>>> Carol
>>>> carol.pearson@xxxxxxxxxxxx
>>>>
>>>>
>>>> ----- Original Message ----- 
>>>> From: "Jackie Cairns" <cairnsplace@xxxxxxx>
>>>> To: <access-uk@xxxxxxxxxxxxx>
>>>> Sent: Wednesday, January 09, 2008 2:27 PM
>>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...
>>>>
>>>>
>>>>> Hi Carol
>>>>>
>>>>> I'll do my best, but Steve will doubtless chip in and help you out as 
>>>>> well.
>>>>>
>>>>> I think your 6630 is a phone supporting TALKS second edition.  If this

>>>>> is so, you can go to
>>>>> www.comproom.co.uk
>>>>> and find the link to download the second edition.
>>>>>
>>>>> I don't know your phone, so couldn't say for certain how you would put

>>>>> it on there.  If you want TALKS to allow you to cursor through numbers

>>>>> and letters one digit or character at a time, press the TALKS key 
>>>>> followed by a long press of the number two digit.  You can cycle 
>>>>> through original, letters or word modes.  Letters is best.
>>>>>
>>>>> If you want to add a contact to your phone book, within their message,

>>>>> bring up the menu and go to add recipient to contact.  You then get 
>>>>> the choice of updating an existing contact, or creating a new one, 
>>>>> where you can fill in the fields with their name etc.
>>>>>
>>>>> I hope this is enough to get you going, and that others will chip in 
>>>>> too.
>>>>>
>>>>> Jackie
>>>>> If you want
>>>>> ----- Original Message ----- 
>>>>> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
>>>>> To: "Access UK Mailing List" <access-uk@xxxxxxxxxxxxx>
>>>>> Sent: Wednesday, January 09, 2008 2:11 PM
>>>>> Subject: [access-uk] A FEW TALKS QUESTIONS ...
>>>>>
>>>>>
>>>>>> Hi all,
>>>>>>
>>>>>> I haven't upgraded my Talks for ages and can't locate my version 
>>>>>> number. (Sure it's easy, but ...)  What's the latest version for my 
>>>>>> 6630, please, and from where is it obtained?  No, I can't remember 
>>>>>> how to install either.
>>>>>>
>>>>>> I've decided to upgrade to the latest version as I haven't done so 
>>>>>> for ages and couldn't find a way to read a telephone number put 
>>>>>> within a message and copy it to my contacts.  Can this be done?  (I 
>>>>>> can't remember all of the number to type it in by hand and am 
>>>>>> therefore hoping I can copy, somehow) or read just the number, which 
>>>>>> I also seem unable to do.
>>>>>>
>>>>>> Any help, as always, much appreciated.  Thanks bunches!
>>>>>>
>>>>>> --
>>>>>> Carol
>>>>>> carol.pearson@xxxxxxxxxxxx
>>>>>>
>>>>>>
>>>>>> ** To leave the list, click on the immediately-following link:-
>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>>> ** If this link doesn't work then send a message to:
>>>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>>>> ** and in the Subject line type
>>>>>> ** unsubscribe
>>>>>> ** For other list commands such as vacation mode, click on the
>>>>>> ** immediately-following link:-
>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>>> ** or send a message, to
>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>>
>>>>>
>>>>> ** To leave the list, click on the immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>> ** If this link doesn't work then send a message to:
>>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>>> ** and in the Subject line type
>>>>> ** unsubscribe
>>>>> ** For other list commands such as vacation mode, click on the
>>>>> ** immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>> ** or send a message, to
>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>>
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: