Hi Jackie, Peter must have some strange version of Talks that even I don't know about then <Smile>. All the best Steve -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Jackie Cairns Sent: 10 January 2008 18:52 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... Really? It's always been TALKS key followed by digit two on mine before the latest upgrade and today. How interesting (smile). Jackie ----- Original Message ----- From: "Peter Beasley" <p.beasley@xxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Thursday, January 10, 2008 6:44 PM Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... > Actually, on my 6600 it is talks key followed by 1 to toggle between > letters, words, and letters and words. > ----- Original Message ----- > From: "Jackie Cairns" <cairnsplace@xxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Thursday, January 10, 2008 5:54 PM > Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... > > >> Hi Carol >> >> If you follow this sequence, see what happens: >> >> TALKS key then long press of number 2, original. TALKS key then long >> press of number 2, letters. TALKS key then long press of number 2, >> words. If it isn't happening then it's weird because all the phones I've >> ever seen do it with whatever version. >> >> Good luck. >> >> Jackie >> ----- Original Message ----- >> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> >> To: <access-uk@xxxxxxxxxxxxx> >> Sent: Thursday, January 10, 2008 5:41 PM >> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >> >> >>> Jackie, >>> >>> The only way I can cycle through the options is to press the Talks key >>> each time. If I try to do it as I think you're describing - Talks, then >>> hold down the figure 1 key for a few seconds - nothing happens for about >>> four or five seconds and then I end up in Help. >>> >>> Additionally, when I've changed the setting to letters, I still can't >>> move through the text letter by letter to read this phone number. Never >>> have sussed this one. Perhaps I do need to upgrade ... >>> >>> -- >>> Carol >>> carol.pearson@xxxxxxxxxxxx >>> >>> >>> ----- Original Message ----- >>> From: "Jackie Cairns" <cairnsplace@xxxxxxx> >>> To: <access-uk@xxxxxxxxxxxxx> >>> Sent: Thursday, January 10, 2008 11:54 AM >>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>> >>> >>>> Carol, are you pressing the TALKS key, letting it go, then holding down >>>> digit 2 for a few seconds until it says original? Then do the same to >>>> get letters, then the same again to get words, or whichever is your >>>> preference. >>>> >>>> Any better? (smiles). >>>> >>>> Jackie >>>> ----- Original Message ----- >>>> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> >>>> To: <access-uk@xxxxxxxxxxxxx> >>>> Sent: Thursday, January 10, 2008 11:50 AM >>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>>> >>>> >>>>> Thanks, Jackie. I'm cycling through the various modes, but perhaps >>>>> I'm not holding the No 2 key down long enough or something. ... >>>>> >>>>> -- >>>>> Carol >>>>> carol.pearson@xxxxxxxxxxxx >>>>> >>>>> >>>>> ----- Original Message ----- >>>>> From: "Jackie Cairns" <cairnsplace@xxxxxxx> >>>>> To: <access-uk@xxxxxxxxxxxxx> >>>>> Sent: Thursday, January 10, 2008 11:17 AM >>>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>>>> >>>>> >>>>>> Carol, we still have a 6600 that I use to teach people how to text. >>>>>> I had the version you are currently running, and was still able to >>>>>> press the TALKS key, then hold down the number 2 digit for a couple >>>>>> of seconds. It allowed me to cycle through original, letters and word >>>>>> modes. I upgraded mine for £50. It was worth it as it gave me >>>>>> Braille support (not that I have a display), and made the phone run >>>>>> faster. >>>>>> >>>>>> Hope that helps. >>>>>> >>>>>> Jackie >>>>>> ----- Original Message ----- >>>>>> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> >>>>>> To: <access-uk@xxxxxxxxxxxxx> >>>>>> Sent: Wednesday, January 09, 2008 9:44 PM >>>>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>>>>> >>>>>> >>>>>>> Jackie, >>>>>>> >>>>>>> I couldn't get the individual letters up, though I had already done >>>>>>> what you suggest. >>>>>>> >>>>>>> Perhaps I do need to update my TALKS. >>>>>>> >>>>>>> Thanks anyway. Will bear it all in mind ... >>>>>>> >>>>>>> No doubt I'll get there soon. >>>>>>> >>>>>>> -- >>>>>>> Carol >>>>>>> carol.pearson@xxxxxxxxxxxx >>>>>>> >>>>>>> >>>>>>> ----- Original Message ----- >>>>>>> From: "Jackie Cairns" <cairnsplace@xxxxxxx> >>>>>>> To: <access-uk@xxxxxxxxxxxxx> >>>>>>> Sent: Wednesday, January 09, 2008 2:27 PM >>>>>>> Subject: [access-uk] Re: A FEW TALKS QUESTIONS ... >>>>>>> >>>>>>> >>>>>>>> Hi Carol >>>>>>>> >>>>>>>> I'll do my best, but Steve will doubtless chip in and help you out >>>>>>>> as well. >>>>>>>> >>>>>>>> I think your 6630 is a phone supporting TALKS second edition. If >>>>>>>> this is so, you can go to >>>>>>>> www.comproom.co.uk >>>>>>>> and find the link to download the second edition. >>>>>>>> >>>>>>>> I don't know your phone, so couldn't say for certain how you would >>>>>>>> put it on there. If you want TALKS to allow you to cursor through >>>>>>>> numbers and letters one digit or character at a time, press the >>>>>>>> TALKS key followed by a long press of the number two digit. You >>>>>>>> can cycle through original, letters or word modes. Letters is >>>>>>>> best. >>>>>>>> >>>>>>>> If you want to add a contact to your phone book, within their >>>>>>>> message, bring up the menu and go to add recipient to contact. You >>>>>>>> then get the choice of updating an existing contact, or creating a >>>>>>>> new one, where you can fill in the fields with their name etc. >>>>>>>> >>>>>>>> I hope this is enough to get you going, and that others will chip >>>>>>>> in too. >>>>>>>> >>>>>>>> Jackie >>>>>>>> If you want >>>>>>>> ----- Original Message ----- >>>>>>>> From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> >>>>>>>> To: "Access UK Mailing List" <access-uk@xxxxxxxxxxxxx> >>>>>>>> Sent: Wednesday, January 09, 2008 2:11 PM >>>>>>>> Subject: [access-uk] A FEW TALKS QUESTIONS ... >>>>>>>> >>>>>>>> >>>>>>>>> Hi all, >>>>>>>>> >>>>>>>>> I haven't upgraded my Talks for ages and can't locate my version >>>>>>>>> number. (Sure it's easy, but ...) What's the latest version for >>>>>>>>> my 6630, please, and from where is it obtained? No, I can't >>>>>>>>> remember how to install either. >>>>>>>>> >>>>>>>>> I've decided to upgrade to the latest version as I haven't done so >>>>>>>>> for ages and couldn't find a way to read a telephone number put >>>>>>>>> within a message and copy it to my contacts. Can this be done? >>>>>>>>> (I can't remember all of the number to type it in by hand and am >>>>>>>>> therefore hoping I can copy, somehow) or read just the number, >>>>>>>>> which I also seem unable to do. >>>>>>>>> >>>>>>>>> Any help, as always, much appreciated. Thanks bunches! >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Carol >>>>>>>>> carol.pearson@xxxxxxxxxxxx >>>>>>>>> >>>>>>>>> >>>>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>>>> ** If this link doesn't work then send a message to: >>>>>>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>>>>>> ** and in the Subject line type >>>>>>>>> ** unsubscribe >>>>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>>>> ** immediately-following link:- >>>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>>>>>> ** or send a message, to >>>>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>>>>> >>>>>>>> >>>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>>> ** If this link doesn't work then send a message to: >>>>>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>>>>> ** and in the Subject line type >>>>>>>> ** unsubscribe >>>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>>> ** immediately-following link:- >>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>>>>> ** or send a message, to >>>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>>>> >>>>>>> >>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>> ** If this link doesn't work then send a message to: >>>>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>>>> ** and in the Subject line type >>>>>>> ** unsubscribe >>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>> ** immediately-following link:- >>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>>>> ** or send a message, to >>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>>> >>>>>>> >>>>>> >>>>>> ** To leave the list, click on the immediately-following link:- >>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>> ** If this link doesn't work then send a message to: >>>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>>> ** and in the Subject line type >>>>>> ** unsubscribe >>>>>> ** For other list commands such as vacation mode, click on the >>>>>> ** immediately-following link:- >>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>>> ** or send a message, to >>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>> >>>>> >>>>> ** To leave the list, click on the immediately-following link:- >>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>> ** If this link doesn't work then send a message to: >>>>> ** access-uk-request@xxxxxxxxxxxxx >>>>> ** and in the Subject line type >>>>> ** unsubscribe >>>>> ** For other list commands such as vacation mode, click on the >>>>> ** immediately-following link:- >>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>>> ** or send a message, to >>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>>> >>>> >>>> ** To leave the list, click on the immediately-following link:- >>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>> ** If this link doesn't work then send a message to: >>>> ** access-uk-request@xxxxxxxxxxxxx >>>> ** and in the Subject line type >>>> ** unsubscribe >>>> ** For other list commands such as vacation mode, click on the >>>> ** immediately-following link:- >>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>>> ** or send a message, to >>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>>> >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> >> > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq