[access-uk] Re: A FEW TALKS QUESTIONS ...

Yes Peter it does. But TALKS key followed by a long press of number 2 will change each time you do it between original, letters and words. Steve Nutt where are you? Help me out here (smiles). And I also have TALKS and Zooms Premium. I've got the 6600 on my knee here and have just done it to prove I'm not going mad (lol).


Jackie
----- Original Message ----- From: "Peter Beasley" <p.beasley@xxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, January 10, 2008 6:59 PM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Talks followed by 2 changes from upper case or lower case.
----- Original Message ----- From: "Jackie Cairns" <cairnsplace@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, January 10, 2008 6:52 PM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Really? It's always been TALKS key followed by digit two on mine before the latest upgrade and today. How interesting (smile).

Jackie
----- Original Message ----- From: "Peter Beasley" <p.beasley@xxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, January 10, 2008 6:44 PM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Actually, on my 6600 it is talks key followed by 1 to toggle between letters, words, and letters and words. ----- Original Message ----- From: "Jackie Cairns" <cairnsplace@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, January 10, 2008 5:54 PM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Hi Carol

If you follow this sequence, see what happens:

TALKS key then long press of number 2, original. TALKS key then long press of number 2, letters. TALKS key then long press of number 2, words. If it isn't happening then it's weird because all the phones I've ever seen do it with whatever version.

Good luck.

Jackie
----- Original Message ----- From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, January 10, 2008 5:41 PM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Jackie,

The only way I can cycle through the options is to press the Talks key each time. If I try to do it as I think you're describing - Talks, then hold down the figure 1 key for a few seconds - nothing happens for about four or five seconds and then I end up in Help.

Additionally, when I've changed the setting to letters, I still can't move through the text letter by letter to read this phone number. Never have sussed this one. Perhaps I do need to upgrade ...

--
Carol
carol.pearson@xxxxxxxxxxxx


----- Original Message ----- From: "Jackie Cairns" <cairnsplace@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, January 10, 2008 11:54 AM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Carol, are you pressing the TALKS key, letting it go, then holding down digit 2 for a few seconds until it says original? Then do the same to get letters, then the same again to get words, or whichever is your preference.

Any better?  (smiles).

Jackie
----- Original Message ----- From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, January 10, 2008 11:50 AM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Thanks, Jackie. I'm cycling through the various modes, but perhaps I'm not holding the No 2 key down long enough or something. ...

--
Carol
carol.pearson@xxxxxxxxxxxx


----- Original Message ----- From: "Jackie Cairns" <cairnsplace@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, January 10, 2008 11:17 AM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Carol, we still have a 6600 that I use to teach people how to text. I had the version you are currently running, and was still able to press the TALKS key, then hold down the number 2 digit for a couple of seconds. It allowed me to cycle through original, letters and word modes. I upgraded mine for £50. It was worth it as it gave me Braille support (not that I have a display), and made the phone run faster.

Hope that helps.

Jackie
----- Original Message ----- From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, January 09, 2008 9:44 PM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Jackie,

I couldn't get the individual letters up, though I had already done what you suggest.

Perhaps I do need to update my TALKS.

Thanks anyway.  Will bear it all in mind ...

No doubt I'll get there soon.

--
Carol
carol.pearson@xxxxxxxxxxxx


----- Original Message ----- From: "Jackie Cairns" <cairnsplace@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, January 09, 2008 2:27 PM
Subject: [access-uk] Re: A FEW TALKS QUESTIONS ...


Hi Carol

I'll do my best, but Steve will doubtless chip in and help you out as well.

I think your 6630 is a phone supporting TALKS second edition. If this is so, you can go to
www.comproom.co.uk
and find the link to download the second edition.

I don't know your phone, so couldn't say for certain how you would put it on there. If you want TALKS to allow you to cursor through numbers and letters one digit or character at a time, press the TALKS key followed by a long press of the number two digit. You can cycle through original, letters or word modes. Letters is best.

If you want to add a contact to your phone book, within their message, bring up the menu and go to add recipient to contact. You then get the choice of updating an existing contact, or creating a new one, where you can fill in the fields with their name etc.

I hope this is enough to get you going, and that others will chip in too.

Jackie
If you want
----- Original Message ----- From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
To: "Access UK Mailing List" <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, January 09, 2008 2:11 PM
Subject: [access-uk] A FEW TALKS QUESTIONS ...


Hi all,

I haven't upgraded my Talks for ages and can't locate my version number. (Sure it's easy, but ...) What's the latest version for my 6630, please, and from where is it obtained? No, I can't remember how to install either.

I've decided to upgrade to the latest version as I haven't done so for ages and couldn't find a way to read a telephone number put within a message and copy it to my contacts. Can this be done? (I can't remember all of the number to type it in by hand and am therefore hoping I can copy, somehow) or read just the number, which I also seem unable to do.

Any help, as always, much appreciated.  Thanks bunches!

--
Carol
carol.pearson@xxxxxxxxxxxx


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: