[3ddesktop-dev] Re: 3ddesk --gotocolumn=x


Ok that sounds like an issue.  I tried to reproduce with my
gnome "viewports" but didn't happen.  I'll try with workspaces
and then with WindowMaker though.

--brad



murr-man (murr-man@xxxxxxxxxxxxxxx) wrote:

> 
> Ok, this is wierd, so I'll try to be as detailed as possible.
> 
> I'm running Redhat 7.3, 3ddesktop 0.2.2, imlib2 1.0.6, WindowMaker 
> 0.8.0.  I've compiled 3ddesktop from source, using gcc 3.1.1.
> 
> When I run '3ddesk --gotocolumn=x' twice with the same mode, the first 
> time will work, but the second time will flip/rotate/slide to the 
> column, but it wont actually change workspaces.  But if I chose two 
> different modes, it will work just fine.
> 
> For example, the following will, starting from workspace 1, go to 
> workspace 3, and then attempt to go to workspace 2, but wind up back at 
> workspace 3:
> 
> 3ddesk --gotocolumn=3 --mode=priceisright
> 3ddesk --gotocolumn=2 --mode=priceisright
> 
> Now, the following will work successfully both times:
> 
> 3ddesk --gotocolumn=3 --mode=priceisright
> 3ddesk --gotocolumn=2 --mode=carousel
> 
> Also, I have noticed, and this has been my workaround, that 
> --mode=random seems to work correctly everytime.  Thank you.
> 
> 
> Bryan Bueter
> 
> 
> 
> 


________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag

Other related posts: