FreeLists / pcdlist / [pcdlist] Re: OrCAD Users Group TampaBay

["Watt, William (sys) USX" <wwatt@xxxxxxxx>]

Let's settle a question for me.  In almost every place I've worked, we have
marked the cathode end of a diode to indicate its polarity.  Usually with a
dot.
What is the majority thinking on this.  Do we mark the anode or cathode end?

Bill Watt
Moog Inc
Jamison Rd
East Aurora, NY 14052
716-687-5596
wwatt@xxxxxxxx


> -----Original Message-----
> From: MGehri [SMTP:mgehri@xxxxxxxx]
> Sent: Thursday, May 30, 2002 1:36 PM
> To:   pcdlist@xxxxxxxxxxxxx
> Subject:      [pcdlist] Re: OrCAD Users Group TampaBay
> 
> 
> Much easier to put a silkscreen dot next to pin 1 and the + (anode) side
> of
> other devices. Do you have room for ref des?
> 
> Michael D. Gehri
> Senior Designer
> Southwest Research Institute
> Phone 210-522-3777
> FAX 210-522-2709
> 
> 
> 
> 
> 
> 
> 
> To unsubscribe from the pcdlist, send an e-mail to
> pcdlist-request@xxxxxxxxxxxxx with "unsubscribe" in the subject field.
> 
> If you have any questions or problems, contact tgentry@xxxxxxxxxxxxxxxxxx
> 
> To unsubscribe from the pcdlist, send an e-mail to
> pcdlist-request@xxxxxxxxxxxxx with "unsubscribe" in the subject field.
> 
> If you have any questions or problems, contact tgentry@xxxxxxxxxxxxxxxxxx
To unsubscribe from the pcdlist, send an e-mail to 
pcdlist-request@xxxxxxxxxxxxx with "unsubscribe" in the subject field.

If you have any questions or problems, contact tgentry@xxxxxxxxxxxxxxxxxx