FreeLists / pcdlist / [pcdlist] Re: Printed Circuit Mag

["Pete Waddell" <PWaddell@xxxxxxxxxxxxxxxx>]

If you see my little lost baby, please send it home to me....

Pete Waddell
President 
UP Media Group
678-589-8813
pwaddell@xxxxxxxxxxxxxxxx

>>> fworm@xxxxxxxxx 02/27/03 02:30PM >>>

Poor Pete lost his sense of humor when he became an Executive  :-)

Ron Olinyk wrote:

>Thanks for the update Pete. I think the msg on the 
>Pads LS was a result of a slow morning for someone. 
>It was off topic and should have been posted on 
>this LS instead. But as is typical of the Pads LS 
>there always seem to be more off-topic postings 
>than on-topic.
>Anyway, I think combining the mags is a great idea 
>and I look forward to the new format. I hope though 
>that you will be making some guest appearances. We 
>miss you dude. Your back page humor was always very 
>"enlightening".
>Ron Olinyk,CID
>Mindlink Technologies
>
>At 12:13 PM 2/26/03 -0500, you wrote:
>
>A little birdy bashed thru the safety glass in my 
>office this morning
>and with it's last gasp before assuming room 
>temperature told me that
>there seems to be some confusion and 
>misunderstanding (especially on the
>Pads lists serve) about Printed Circuit Design 
>magazine and UP Media
>Group. I have not seen the comments on the PADs 
>list serve, but have
>gotten a couple of phone calls about it and it 
>seems that someone has
>gotten at least part of the story wrong. I'm not 
>sure whether the
>comments were planted by a competitor or by someone 
>who just does not
>know what they are talking about, so thought I'd 
>take just a short
>minute to clarify from a 10,000 foot view.
>
>Basically we are changing the name of PCD to 
>Printed Circuit Design and
>Manufacture. We are combining the content of PCD 
>and PCFAB magazines
>into one monthly mag. The new circulation will  be 
>a combination of both
>books. The editors will be the same. Many of the 
>columnists will be the
>same. We bounced this off a number of readers and 
>advertisers late last
>year and the response was an overwelming YES!. It's 
>really not very
>complicated, this is something that our editorial 
>review boards have
>been suggesting for years. It is also part of an 
>effort to bring the
>design and fab communities closer together so that 
>designers can
>understand more about the manufacturing side, 
>manufacturing can
>understand more about design and suppliers can 
>understand what their
>customers (that would be you) are thinking and what 
>you need from them.
>
>
>There is a press release on  pcdmag.com that 
>explains this (it is
>written in marketing speak - a language in which 
>many of us are not
>fluent) in greater depth. As always, if you or any 
>of your associates
>have questions or comments do not hesitate to call 
>or write any of the
>staff here, including me. You'll always get the 
>straight story that way.
>It's easy, first initial, last name 
>@upmediagroup.com.
>
>Stay well, and good luck,
>Pete
>
>P.s.  If anyone wants to forward this to the PADs 
>list, fine w/ me.
>
>p.
>
>Pete Waddell
>President
>UP Media Group
>678-589-8813
>pwaddell@xxxxxxxxxxxxxxxx 
>To unsubscribe from the pcdlist, send an e-mail to 
>pcdlist-request@xxxxxxxxxxxxx with "unsubscribe" in 
>the subject field.
>
>If you have any questions or problems, contact 
>tgentry@xxxxxxxxxxxxxxxxxx
>
>To unsubscribe from the pcdlist, send an e-mail to
pcdlist-request@xxxxxxxxxxxxx with "unsubscribe" in the subject
field.
>
>If you have any questions or problems, contact
tgentry@xxxxxxxxxxxxxxxxxx
>
>  
>



To unsubscribe from the pcdlist, send an e-mail to
pcdlist-request@xxxxxxxxxxxxx with "unsubscribe" in the subject
field.

If you have any questions or problems, contact
tgentry@xxxxxxxxxxxxxxxxxx
To unsubscribe from the pcdlist, send an e-mail to 
pcdlist-request@xxxxxxxxxxxxx with "unsubscribe" in the subject field.

If you have any questions or problems, contact tgentry@xxxxxxxxxxxxxxxxxx