Browse thin: This Month's Archive • Main Archive Page • Related posts • Previous by Date • Next by Date

[THIN] Re: Another CAC problem

From: "Greg Reese" <gareese@xxxxxxxxx>
To: thin@xxxxxxxxxxxxx
Date: Thu, 6 Dec 2007 14:06:51 -0600

When I encounter this, I just hit cancel or esc at the pin prompt and I am
immediately presented with a name and password prompt.

On Dec 6, 2007 1:47 PM, Rich Alexander <rich@xxxxxxxxxxxxxxxxxx> wrote:

>  Thanks, Greg.  That's how we have it set up.  The main page has two
> links.  One for CAC, one for explicit.  Each is working perfectly.
>
> The problem is trying to use explicit credentials while there is a CAC in
> the reader.
>
> I was just curious if anyone had had this before and had a solution.
>
> Our stance is that it is working as designed.  The only people effected
> are external and on a diferent domain.  They log on to their local
> workstation with CAC and use explicit to use our PS farm for one app.
>
> ----- Original Message -----
> *From:* Greg Reese <gareese@xxxxxxxxx>
> *To:* thin@xxxxxxxxxxxxx
> *Sent:* Thursday, December 06, 2007 2:16 PM
> *Subject:* [THIN] Re: Another CAC problem
>
> I usually setup two separate WI sites.  One for CAC users with passthrough
> etc and one for explicit. Then I put a link for each of them on the other's
> site just in case someone goes to the wrong one by mistake.
>
> On Dec 6, 2007 12:24 PM, Rich Alexander <rich@xxxxxxxxxxxxxxxxxx> wrote:
>
> >
> >
> > Hi,
> >
> > We use CAC only logon here.  We have our WI running both Smart Card and
> > Explicit logons.
> >
> > When logged on to the workstation with CAC and loggin into the WI with
> > Explicit, we are unable to launch any apps properly.  They just time out and
> > then ask for credentials.  Logging into the WI with CAC and then launching
> > the apps works fine.  In fact, pulling the CAC and then logging in
> > explicitly works as well.
> >
> > If I save the ICA file and remove the Username/Domain/Password entries
> > and then launch, it will properly prompt for credentials and then launch
> > properly.
> >
> > Any ideas on a config change we could make to fix app launching with
> > explicit login while a CAC is inserted?
> >
> > We are funneling all connections through a secure gateway over SSL.
> >
> > PS 4.0
> >
> > Thanks!
> >
> > Rich
> >
> >
>
>

Follow-Ups:

[THIN] Re: Another CAC problem
From: Rich Alexander

References:
- [THIN] Another CAC problem
  - From: Rich Alexander
- [THIN] Re: Another CAC problem
  - From: Greg Reese
- [THIN] Re: Another CAC problem
  - From: Rich Alexander

[THIN] Re: Another CAC problem

Other related posts: