FreeLists / si-list / [SI-LIST] internal time step too small error in transient analysis

["boli sudha" <bolisudha@xxxxxxxxx>]

hi all,
         iam doing a project on WLAN synthesizer.iam using ADS 2004A. i have
designed individual blocks of VCO,divider blocks. for divider iam using
master slave flipflops. so initially i need to reset them, for that i used a
reset signal. if i run this  divider block it is running individually in
transient analysis. but if i integrate this block with VCO's output it is
giving internal time step error.  so i changed every  thing like below which
i got when i search  in google. but error is coming again .

1. Increase rise-time and/or fall time of the pulse
2. Increase ITL4 between 25 and 500, (default is 10)
3. Change TRAP method to GEAR
4. Change MAXORD to 3, 4, 5, and 6
5. Change TRTOL to 25 (default is 7)
6. Change LVLTIM from 2 to 1
7. Increase TNUM
8. Change ITL4 to 100
9. Reset above, and set these
RELTOL = 0.01
ABSTOL = 1.0e-9
VNTOL = 1.0e-4
LVLTIM = 1
METHOD = GEAR
MAXORD = 2
TNUM = "pick big number"
ITL4 = 100

can anybody help me please.


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu