
|
[si-list]
||
[Date Prev]
[12-2006 Date Index]
[Date Next]
||
[Thread Prev]
[12-2006 Thread Index]
[Thread Next]
[SI-LIST] Re: HSPICE Fieldsolver vs FastHenry
- From: "Andy Kuo" <andy1390@xxxxxxxxx>
- To: "Jory McKinley" <jory_mckinley@xxxxxxxxx>
- Date: Wed, 6 Dec 2006 14:06:27 -0800
Hi Jory,
I have compared both the loop inductance and partial inductance and
cannot have the values agree.
Here is the inductance from HSPICE fieldsolver and it is per meter
+ Lo = 3.684847e-07 2.023918e-08
+ 2.023918e-08 3.684847e-07
To compare with FastHenry, I multipled the above to 25.4mm as the
length of the conductor is 25.4mm and the results are:
+ Lo = 9.3595114e-9 5.1407517e-10
+ 5.1407517e-10 9.3595114e-9
Compare to FastHenry (partial inductance) below, the results are still
very far away.
Row 0: 2.99871e-008 1.61083e-008
Row 1: 1.61083e-008 2.99868e-008
Does anyone know why?
Thanks,
Andy
On 12/6/06, Jory McKinley <jory_mckinley@xxxxxxxxx> wrote:
> Hello Andy,
> Could be that you are looking at partial inductance versus loop inductance
> which will not agree. Can you post the results?
> -Jory
>
>
> Andy Kuo <andy1390@xxxxxxxxx> wrote:
>
> Hi all,
> I am trying to extract the inductance from both HSPICE fieldsolver and from
> Fasthenry on a simple 2 parallel conductors with a reference ground plane.
> However, the extracted data from HSPICE fieldsolver and FastHenry doesn't
> agree.
>
> I know the value from HSPICE is per meter value, so I have multiplied the
> value with the correct length to compare. Still, the results do not
> correlate at all.
>
> Does anyone know the difference between the two?
>
> --
> Andy Kuo
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
>
>
> ________________________________
Want to start your own business? Learn how on Yahoo! Small Business.
>
>
--
Andy Kuo
System on a Chip (SOC) Research Group
Electrical and Computer Engineering
University of British Columbia
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|