FreeLists / si-list / [SI-LIST] Via inside SMD discrete

[Naren Thesia <naren.thesia@xxxxxxxxx>]

Hi All,


My question is related to general PCB discussion.

Recently I saw via between the component pad for SMD decap (As shown in
attached screen shot). I got clarification that it is to improve the
performance of decap in High speed design!



I unable to understand that clearly. Any one can share his or her
experience?


Thanks in advance


-- Binary/unsupported file stripped by Ecartis --
-- Type: image/jpeg
-- File: Capacitor.jpg


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu