Anyone out there using the new Cadence tool, Allegro PCB SI 630?
I'm interested in other's experiences and feedback about whether they think
this tool is effective standalone, or needs to be used in conjunction with
other tools.
Private feedback is both welcome and appreciated - I don't want to make
people uncomfortable by debating a particular tool's merits in a general
forum, but I do need to talk to other users to gain another perspective
besides our own.
Thanks,
Todd.
Todd Westerhoff
High Speed Design Specialist
Cisco Systems
1414 Massachusetts Ave - Boxboro, MA - 01719
email:twesterh@xxxxxxxxx
ph: 978-936-2149
============================================
"Always do right.
This will gratify some people and astonish the rest."
- Mark Twain
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
