|
[si-list]
||
[Date Prev]
[12-2002 Date Index]
[Date Next]
||
[Thread Prev]
[12-2002 Thread Index]
[Thread Next]
[SI-LIST] Re: 10 Layer Board Stack up
- From: stephanie.goedecke@xxxxxxxxxxx
- To: si-list@xxxxxxxxxxxxx
- Date: Mon, 2 Dec 2002 10:18:32 +0100
Hi,
generally, the layers should be symmetrical. The details of the layout depend
on the
details of the board.
Stephanie Goedecke
Philips - SP3D Chip Design GmbH
Petersbrunnerstr.17
82319 Starnberg / Germany
Phone: +49-8151-270-160
Fax : +49-8151-270-200
Hi ,
In 10 Layer Board stack How Multiple Ground Plane Will be More effective and
Why.
Is there any Formula/Thumb rule behind this.
most of my Critical Signal ( CLK) are Running at Signal Layer 1
and My Board Stack up is
Top
GND
Signal Layer 1
VCC3.3
GND
VCC2.5
Signal Layer 2
Signal Layer 3
GND
Bottom
Thanks in Advance.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
