[SI-LIST] cross talk

["Gopalakrishnan Sethuraj" <gopalakrishnan.sethuraj@xxxxxxxxx>]

hai 

i am very intersted to know about the 20-H rule in board design and Cross 
talk.how the cross talk is occur on the board.could you explain that.

Thanks&Regards
Gopalakrishnan.S

-----Original Message-----
From: Ched-Chang Chai [mailto:ched_chang@xxxxxxxxxxx]
Sent: Monday, December 02, 2002 9:35 AM
To: Gopalakrishnan Sethuraj; si-list@xxxxxxxxxxxxx
Subject: Re: [SI-LIST] terminator resistor


Hi Gopalakrishnan,

If you are using source termination, the resistor value should be the 
difference between the trace characteristic impedance (Zo) and the driver 
output impedance (Zout):

Termination resistor = Zo - Zout.

Theoretically, the signals will be fully absorbed at the driver after one 
round trip time.

Anyway, I found that the output impedance is not a constant value.
From my experience, termination resistor with 22-47ohm will absorb most of 
the ringing.

--
Regards,
Chai


>From: "Gopalakrishnan Sethuraj" <gopalakrishnan.sethuraj@xxxxxxxxx>
>Reply-To: gopalakrishnan.sethuraj@xxxxxxxxx
>To: <weirsp@xxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
>Subject: [SI-LIST] terminator resistor
>Date: Mon, 2 Dec 2002 09:03:49 +0530
>
>hai
>
>how to find out the terminator resistor value when the ringing is occur in 
>high speed signal transmission line.could you let me know.is there any 
>specfic formula to find the terminator value?
>
>Thanks&Regards
>Gopalakrishnan.S


_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online 
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963


-- Attached file included as plaintext by Ecartis --
-- File: Wipro_Disclaimer.txt

**************************Disclaimer************************************

Information contained in this E-MAIL being proprietary to Wipro Limited is 
'privileged' and 'confidential' and intended for use only by the individual
 or entity to which it is addressed. You are notified that any use, copying 
or dissemination of the information contained in the E-MAIL in any manner 
whatsoever is strictly prohibited.

***************************************************************************


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts:

[SI-LIST] cross talk