
|
[si-list]
||
[Date Prev]
[12-2001 Date Index]
[Date Next]
||
[Thread Prev]
[12-2001 Thread Index]
[Thread Next]
[SI-LIST] Re: Undershoot, Overshoot
- From: "Jon Powell" <jpowell@xxxxxxxxxxxx>
- To: <twester@xxxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Fri, 7 Dec 2001 07:49:28 -0800
There are actual IEEE standard definitions of Overshoot and Undershoot.
They are essentially what people are saying here.
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx
> [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Todd Westerhoff
> Sent: Thursday, December 06, 2001 10:00 AM
> To: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Re: Undershoot, Overshoot
>
>
>
> Ahem. Correction.
>
> SPECCTRAQuest "Overshoot High" is referenced to ground, not
> the rail as I
> stated earlier. The user has to subtract the rail voltage,
> which will vary
> between the {fast, typical, slow} cases to get the actual
> overshoot beyond
> the rail.
>
> Arpad's note reminded me of this ...
>
> Happy Holidays,
>
> Todd.
>
> Todd Westerhoff
> SI Engineer - Hammerhead Networks
> 5 Federal Street - Billerica, MA - 01821
> email:twester@xxxxxxxxxxx - ph: 978-671-5084
> ============================================
>
> "Oh, but ain't that America, for you and me
> Ain't that America, we're something to see
> Ain't that America, Home of the Free
> Little pink houses, for you and me"
>
> - John Mellencamp
>
>
>
>
>
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx
> [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Todd Westerhoff
> Sent: Thursday, December 06, 2001 12:24 PM
> To: Andrew.Ingraham@xxxxxxxxxx; si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Undershoot, Overshoot
>
>
>
> If I had my way, I would relate electrical overshoot and
> undershoot to their
> mechanical equivalents as such:
>
> Overshoot = underdamped
> Undershoot = overdamped
>
> Therefore, I would call the amount a signal bounces below
> ground on the
> incident edge "negative overshoot".
>
> Andy is quite right, however - there is abundant disagreement
> about this
> particular terminology, so this is just my opinion.
>
> As for SPECCTRAQuest, it calls the amount the signal exceeds the rail
> "Overshoot High", and the amount the signal goes below ground
> "Overshoot
> Low".
>
> Happy Holidays,
>
> Todd.
>
> Todd Westerhoff
> SI Engineer - Hammerhead Networks
> 5 Federal Street - Billerica, MA - 01821
> email:twester@xxxxxxxxxxx - ph: 978-671-5084
> ============================================
>
> "Oh, but ain't that America, for you and me
> Ain't that America, we're something to see
> Ain't that America, Home of the Free
> Little pink houses, for you and me"
>
> - John Mellencamp
>
>
>
>
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|