FreeLists / si-list / [SI-LIST] Re: How to evaluate IBIS model

["Muranyi, Arpad" <arpad.muranyi@xxxxxxxxx>]

Zhangkun,

You can run the IBIS parser to find syntax errors,
or you can check visually its IV and Vt curves with
any of the IBIS maker tools which can plot them,
and you can run simulations with the IBIS models
and the original transistor model and overlay the
waveforms.

Arpad
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Zhangkun
Sent: Thursday, November 09, 2006 4:53 PM
To: si-list
Cc: ???; ???
Subject: [SI-LIST] How to evaluate IBIS model

Dear all
How do you evaluate IBIS model?

Best Regards

Zhangkun
2006.11.10
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu