FreeLists / si-list / [SI-LIST] Jitter Analysis Using Spice.

[Sanchayan Sinha <sanchayan@xxxxxxxxx>]

All,
I am currently doing DDR buffer ( the nth time you may have heard it), but i
do not want to create an eye diagram and measure jitter. I want an algorithm
to measure jitter of a paritcular signal A wrt signal B . Can somebody
suggest me an algorithm , to do the same. The problem is bit complicated by
the fact that as spice run times are huge, i do not have more than 30-40
transitions but i would like to extrapolate this over a some probabilistic
distribution (to emulate noise variations) to give me a result which may be
considered to be close to silicon .
Thanks,
Sanchayan
Assumption: The data input is fairly random . I have software which can read
punch files and do any kind of data retrieval etc.

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu