FreeLists / si-list / [SI-LIST] Recommendation for quick-turn board house

[sdb@xxxxxxxxxx (Stuart Brorson)]

Hi everybody,

I am going to spin a 4 layer PCB.  0.062" thick, matl: FR-4.  All
parts are 0603 or larger.  The board should work at up to 500 MHz or
so; no other special SI requirements beyond that.  I am thinking about
using one of the internet-based quick-turn houses which specialize in
prototype runs.  The vendor I am considering is PCBFabExpress.com: 

http://www.pcbfabexpress.com/

Has anybody here used this or similar vendors?  Any good or bad
experiences?  How is their quality compared to e.g. Ambitech or
Praegitzer?  Any special precautions to take?

Thanks,

Stuart
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu