From: "Chin, Dominic Kin Hii" <dominic.kin.hii.chin@xxxxxxxxx>
To: <si-list@xxxxxxxxxxxxx>
Date: Wed, 5 Nov 2003 16:04:36 +0800
Hi experts,
I am doing PCB design to communicate IC1 to IC2. The termination of
these ICs:
IC1 buffer: 25 ohm
IC2 buffer: 50 ohm
If I use a 50 ohm trace, there will be impedance mismatch and reflection
at IC1 or vice versa. How should I design PCB to cater for these
different terminated impedance ICs?=20
Thanks
Dom
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
