FreeLists / si-list / [SI-LIST] Re: HSPICE & Common Model Interface

["Tracy Barclay" <Tracy.Barclay@xxxxxxxxxxxx>]

Hi Claudio,

No, it is not possible to define a C/C++ function in an element.  Is the
math function something that cannot be described as an equation or a table
of time and voltage points?

Common Model Interface (CMI) allows you to use a dynamically-linked shared
library, to integrate MOS, JFET and MESFET models into HSPICE.


Tracy Barclay
CAE
Synopsys, Inc.

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx
[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Claudio Siviero
Sent: Wednesday, November 06, 2002 12:50
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] HSPICE & Common Model Interface


Dear friends of si-list,
I'm a university student in electronic engineering at Politecnico di Torino
(Italy) and I'm doing a thesis about signal integrity.
I'm working with HSPICE from Avant!, version 99.2.
I have a question about drawing up netlist file: is it possible to write in
the instruction statement any functions in Borland C/C++ language?

Example:
Behavorial voltage source between node 1 and 0

E1    1    0     VOL= ' voltage(A0,A1,A2,....) '

where ' voltage(.....) ' is a C/C++ function allocated in a source file.

I've learned any documents about CMI (Common Model Interface) as option of
Star-Hspice on www.synopsys.com: is CMI useful at my necessity? Or there is
another way to do it?

Thanks for all.
Regards.

Claudio Siviero


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu