[SI-LIST] About IBIS error from IBIS check

["Jack W.C. Lin" <JackWCLin@xxxxxxxxxxxx>]

Hi All SI friends:
Recently, I found many errors such like this from IBIS check:

ERROR - Model [Name]: The [Falling Waveform] 
      with [R_fixture]=60 Ohms and [V_fixture_min]=3V
      has MIN column DC endpoints of  2.23V and  3.00v, but
      an equivalent load applied to the model's I-V tables yields
      different voltages ( 2.10V and  3.00V),
      a difference of  6.44% and  0.00%, respectively. 

I don't know why these I-V curves have to apply on "an equivalent load", it
seems a double check of those V-T points. If this happened, how could I
modify it? Any recommands are highly appreciated! Thanks
Jack


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts:

[SI-LIST] About IBIS error from IBIS check

[SI-LIST] Re: About IBIS error from IBIS check