FreeLists / si-list / [SI-LIST] Test point program.

[si-list] || [Date Prev] [11-2001 Date Index] [Date Next] || [Thread Prev] [11-2001 Thread Index] [Thread Next]

[SI-LIST] Test point program.

From: "Inmyung Song" <imsong@xxxxxxxxxxxxxx>
To: "Signal Integrity Mail Group" <si-list@xxxxxxxxxxxxx>
Date: Fri, 16 Nov 2001 13:36:03 +0900

Is there anyone know any CAD software that can generate test points based on
components leads assembled on the PCB?

I guess that the ICT_GEN program of MentorGraphics is a that. right?

Please let me know.

Thank you so much.


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu