FreeLists / si-list / [SI-LIST] Re: PCI-X package info.

["Ingraham, Andrew" <Andrew.Ingraham@xxxxxxxxxx>]

The PCI-X specification has some package information.  See Table 9-1
(Cin, Cclk, Cidsel, Lpin).  That's about all they specify, leaving most
of the IC package specifics up to the vendor.  The device should meet
all other specs (timing for example) regardless of the package
specifics.  Some of those other specs will indirectly have an impact on
the package parameters.

As for the maximum clamps, only minimum clamps are specified, no maxima.

Regards,
Andy

> ----------
> I'm trying to create a generic PCI-X I/O buffer ibis,
> based on PCI-X specification. I got almost everything
> except the package information and GND and Power clamp
> (Max).
>=20
> I didn't find the information anywhere in the
> specification and I was wondering if there are any!
>=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu