FreeLists / si-list / [SI-LIST] Spice to Ibis conversion

[Siva kumar <sivakumar_skm@xxxxxxxxx>]

Hi SIexperts,
         Can anybody give me an idea how to convert an
spice model to ibis model using Icap4 (or
Orcad-pspice.)
        I have downloaded "s2ibis2.exe" and i tried to
follow the steps given. But i couldn't succeed in
that.  It gives the following error " Starting Pspice
job with input "putpad.spi"  failure!!!" (Is there any
problem here in invoking and passing file to Pspice??)
      I would like to know more on the input file
formats that are required and accepted by "s2ibis2"
and how to invoke spice application.I don't have
hspice or spectre so i couldn't try with the example
files given with s2ibis2.  
      And also i tried with "spitran10f" . There also
i didn't get the results.
     I welcome your suggestions ( If there is any
example file available for Icap4 or Orcad pspice it
would be very helpful for me).


thanks in advance,
siva
      

__________________________________________________
Do You Yahoo!?
Find a job, post your resume.
http://careers.yahoo.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu