FreeLists / si-list / [SI-LIST] A ibis problem in Hyperlynx simulation

["Han Li" <jasonleehan@xxxxxxxxx>]

Hi experts:
     when i simulate BCM5421s with ibis model in hyperlynx, a error
occured:"Differential pin 116 is paired with a Nc pin in component BCM5421s
of file E:\........"
     I open the model, the differential pins are like this in ibis file:
115   SGIN+      NC
116   SGIN-      NC

118   SGOUT+     NC
119   SGOUT-     NC

121   SCLK+      NC
122   SCLK-      NC

|************************************************************************
[Diff Pin]   inv_pin   vdiff        tdelay_typ
115             116     100mV        0
118             119     0V               0
121             122     0V               0



but the analog differential pins are OK, they are:
47    TRD[0]+    NC
48    TRD[0]-    NC
49    TRD[1]-    NC
50    TRD[1]+    NC

Could anyone provide some advices on fixing the problem? Thanks a lot.


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu