FreeLists / si-list / [SI-LIST] Re: Trace Width and Skin Effect Loss

[steve weir <weirsi@xxxxxxxxxx>]

If you want reasonably accurate numbers you should use a field solver on 
your intended geometry.  If you do not own a field solver, you can rent 
time on Polar for cheap and get decent results.  The remaining viable 
alternative is to go with pre-engineered interconnect.

If you are just asking generically what happens:  skinnier traces have 
higher current concentrations than wider traces.

Steve.
J.Jebakumar Samuel wrote:
> Hi All,
> What is the relation ship between trace width (differential) and skin effect 
> loss?
>
> Jebakumar Samuel
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
>                 http://www.si-list.net
>
> List archives are viewable at:     
>               http://www.freelists.org/archives/si-list
> or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>   
>
>
>
>   


-- 
Steve Weir
Teraspeed Consulting Group LLC 
121 North River Drive 
Narragansett, RI 02882 

California office
(408) 884-3985 Business
(707) 780-1951 Fax

Main office
(401) 284-1827 Business 
(401) 284-1840 Fax 

Oregon office
(503) 430-1065 Business
(503) 430-1285 Fax

http://www.teraspeed.com
This e-mail contains proprietary and confidential intellectual property of 
Teraspeed Consulting Group LLC
------------------------------------------------------------------------------------------------------
Teraspeed(R) is the registered service mark of Teraspeed Consulting Group LLC

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu