FreeLists / si-list / [SI-LIST] Re: AC Coupled Signals

["Jeon, Tae-Kwang" <Tae-Kwang.Jeon@xxxxxxx>]

Hi Bill,
 

Oh, that was a typo. You are absolutely right. 

 

GL=(ZL-Zo)/(ZL+Zo) is correct, but not GS=(ZL-Zo)/(ZL+Zo)

 

Thanks,

TK

 

________________________________

From: DrFWS@xxxxxxx [mailto:DrFWS@xxxxxxx] 
Sent: Wednesday, October 03, 2007 1:43 PM
To: Jeon, Tae-Kwang
Cc: si-list@xxxxxxxxxxxxx
Subject: Re: [SI-LIST] Re: AC Coupled Signals

 

Hi TK - In your email to the SI List today, your third line reads 

 

                                Where, GS=(Zs-Zo)/(Zs+Zo) and
GS=(ZL-Zo)/(ZL+Zo)

 

Shouldn't that be        Where, GS=(Zs-Zo)/(Zs+Zo) and
GL=(ZL-Zo)/(ZL+Zo)    ?

 

- Bill


Dr. F. Williams Sarles 
Consulting Engineer 
FWS ENGINEERING 
54 Ledgelawn Avenue
Lexington MA 02420-3449
Tel: 781-862-0607
Fax: 781-861-7518
Email: DrFWS@xxxxxxx
FWSarles@xxxxxxxxxxxx





________________________________

See what's new at AOL.com <http://www.aol.com?NCID=AOLCMP00300000001170>
and Make AOL Your Homepage
<http://www.aol.com/mksplash.adp?NCID=AOLCMP00300000001169> .


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field


List technical documents are available at:
                http://www.si-list.net

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu