
|
[si-list]
||
[Date Prev]
[10-2007 Date Index]
[Date Next]
||
[Thread Prev]
[10-2007 Thread Index]
[Thread Next]
[SI-LIST] Re: si-list Digest V7 #326
- From: "Dmitriev-Zdorov, Vladimir" <vladimir_dmitriev-zdorov@xxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Mon, 1 Oct 2007 08:46:36 -0700
Hi Jeff,
Excuse me for jumping in. It just happened to me recently to refresh my
memory about the relation between S parameters and "voltage transfer
ratio", VTR, (where the latter I think is the ratio of the voltage
across the load to the voltage on the input voltage source, in AC mode).
Actually, VTR is completely defined by S21 if:
- S-parameters were measured for the entire 2-port where the 1-st port
is to attach the source and the 2-nd port is for load;
- the source's internal impedance and the load's impedance are equal the
corresponding S-parameter reference impedances (these two are often
equal but this is not necessary)
If either of these two conditions isn't true, S21 and VTR are not
related with a factor 0.5 (VTR # 0.5*S12)
Vladimir
-----Original Message-----
From: FreeLists Mailing List Manager [mailto:ecartis@xxxxxxxxxxxxx]=20
Sent: Sunday, September 30, 2007 9:21 PM
To: si-list digest users
Subject: si-list Digest V7 #326
Subject: [SI-LIST] Re: AC Coupled Signals
Date: Sun, 30 Sep 2007 19:47:54 -0700
From: "Loyer, Jeff" <jeff.loyer@xxxxxxxxx>
Hi Istvan,
Could you point me towards more information on the "voltage transfer
ratio", and the difference between it and s21/s12? When I did the pulse
response of a system where S21 =3D3D S12 (though S11 and S22 were very
different, and the reflections were significant), it came out equal (p21
=3D3D p12, see my posting of 9/15). Thus, I think the eye diagram will =
=3D
come
out equal if S21 =3D3D S12. =3D20
Thanks,
Jeff Loyer
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|