FreeLists / si-list / [SI-LIST] Re: s-parameter in cadence

["Ray Anderson" <ray.anderson@xxxxxxxxxx>]

Ansoft would be a better shot than Agilent for HFSS.....


-Ray


-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Lynne D. Green
Sent: Thursday, October 06, 2005 3:32 PM
To: azizi_kamran@xxxxxxxxx
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: s-parameter in cadence

If it were me, I would contact Agilent and/or Cadence for Support.

- Lynne=20

-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On
Behalf Of Kamran Azizi
Sent: Thursday, October 06, 2005 1:52 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] s-parameter in cadence

I am having a lot of problem in using s parameter out of HFSS in cadence
spectere.  Seems like there are some tricky setups except fmax, step,
.....
any help? I appreciate it
=20
Kami


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu