FreeLists / si-list / [SI-LIST] Re: ESD Protection Of ATF-55143

[Ray Anderson <reanderson@xxxxxxxxxxxxx>]

Steve-
 
See the Agilent ATF 55143 Reliability Data Sheet ( 
http://literature.agilent.com/litweb/pdf/5988-4885EN.pdf )

Table 4 (ESD Results) claims Human Body Model Results of 300V (Class1) 
and Machine Model Results of 40V (Class A)

-Ray Anderson


Charlie Anderson wrote:

>I was interested in this question so I looked up the data sheets on both
>devices.
>
>The ATF-55143 can handle ESD strikes up to 200V (HBM) while the CM1213
>starts conducting at +/-9V for ESD strikes to 8kV(HBM).  I'd think you
>are covered with that combination.  
>
>Regards,
>Charlie Anderson
>Sr. Electrical Engineer
>Micro Control Company
>(763) 277-9244
>c.anderson@xxxxxxxxxxxxxxxx
>
>  
>
.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu