FreeLists / si-list / [SI-LIST] Re: Hspice : Newbie question

["Andrew Ingraham" <a.ingraham@xxxxxxxx>]

In SPICE, 0V sources are your ammeters.  Insert them where desired.

IBIS models won't help with current into other pins such as the power pin.
They do model the receiver's input pin.

Regards,
Andy


> In above shown topology i want to measure the total
> current taken by the two receivers (I, I1 and I2) ,
> using the IBIS model.
>    Is it possible?


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu