|
[si-list]
||
[Date Prev]
[10-2002 Date Index]
[Date Next]
||
[Thread Prev]
[10-2002 Thread Index]
[Thread Next]
[SI-LIST] Unconnected pins in a connector carrying differential signals
- From: Jineshwari Baratharajan <jini_b30@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Fri, 4 Oct 2002 18:53:59 +0100 (BST)
Hello SI Experts,
We are designing for a very high speed system which
carries a 3.125Gbps differential signals onto another
card. The connector which interfaces the two cards has
lot of free pins.
Will connecting the free pins to ground do any good in
terms of crosstalk/SI.
Or should we leave the pins free.
Any Suggestions.
Regards,
Jineshwari.B
________________________________________________________________________
Missed your favourite TV serial last night? Try the new, Yahoo! TV.
visit http://in.tv.yahoo.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
