|
[si-list]
||
[Date Prev]
[10-2002 Date Index]
[Date Next]
||
[Thread Prev]
[10-2002 Thread Index]
[Thread Next]
[SI-LIST] dc blocking caps in 10G lines
- From: "Rohit Mittal" <rmittal@xxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Thu, 3 Oct 2002 13:33:38 -0700
Do people generally remove the ground below the pads for a dc blocking cap
on microstrip lines. It seems that a shunt capacitance will be formed
between the pad and the plane below it, so if you remove the ground below
it, the discontinuity will be reduced.
thanks
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
