> Did anyone use the ECLinPS low voltage SPICE models
> from Motorola - now ONSEMI?
=20
I have used the ECLinPS models when they were Motorola's.
> I tried to use them and the results are dreadful, I
> followed the recommended setup but the output of the
> buffers (I tried all of them) have a swing of some
> 5mV!
=20
Just to rule out the obvious ... you did include external output
termination resistors, didn't you?
Do your simulations include anything else, such as another vendor's
models?
Andy
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
