
|
[si-list]
||
[Date Prev]
[09-2007 Date Index]
[Date Next]
||
[Thread Prev]
[09-2007 Thread Index]
[Thread Next]
[SI-LIST] Re: how to add Enable circuit for Anlog circuit
- From: steve weir <weirsi@xxxxxxxxxx>
- To: knavaram@xxxxxxxxx
- Date: Fri, 07 Sep 2007 07:11:57 -0700
Navaram, there are a number of different methods. Which is appropriate
depends on what you are trying to pass and inhibit:
* Voltage range
* Current range
* Frequency range
* AC coupled / DC coupled
* Maximum insertion loss switch ON
* Minimum insertion loss switch OFF
* Tolerable impedance range / variation switch ON
* Tolerable phase distortion switch ON
* Cost limits
* Real-estate limits
I suggest you get a book on analog design, or pour over IC appnotes. A
simple method for audio frequency range is to: AC couple to a Thevenin
bias and shunt that with an NMOS FET. The total parts cost for that can
be as low as about $0.04.
Steve.
navaram kumar wrote:
> Hi
> Can anybody help me how to design an Analog circuit with Enable circuit
> Thanks&Regards
> K.Navaram Kumar
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List technical documents are available at:
> http://www.si-list.net
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
>
>
--
Steve Weir
Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
California office
(408) 884-3985 Business
(707) 780-1951 Fax
Main office
(401) 284-1827 Business
(401) 284-1840 Fax
Oregon office
(503) 430-1065 Business
(503) 430-1285 Fax
http://www.teraspeed.com
This e-mail contains proprietary and confidential intellectual property of
Teraspeed Consulting Group LLC
------------------------------------------------------------------------------------------------------
Teraspeed(R) is the registered service mark of Teraspeed Consulting Group LLC
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|