|
[si-list]
||
[Date Prev]
[09-2007 Date Index]
[Date Next]
||
[Thread Prev]
[09-2007 Thread Index]
[Thread Next]
[SI-LIST] high speed trace @ 5Gbps
- From: "raja" <s.raja@xxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Wed, 5 Sep 2007 11:40:23 +0530
Hi Folks,
Can anyone give some board layout input to route 5Gbps serial
interface which is used for Gen2 x16 PCI express application?. which is the
preferred bending for highspeed traces miter or Arc? . We are planing to use
Nelco 4000 -13 as PCB material
Regards
Raja
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
