FreeLists / si-list / [SI-LIST] Antw: Voltage & Prepeg thickness

["Robert Nowak" <RNowak@xxxxxxxxxxxxx>]

Hi,

You can download a free copy of "High-Voltage PCB Design" from

http://www.pcb007.com/anm/templates/article.aspx?articleid=10000&zoneid=60&v=

I think it should answer your question about  HighVoltage.

 Best Regards,




Robert Nowak
Hardware R&D
AUSTRIAN GAMING INDUSTRIES GMBH
Wiener Strasse 158
2352 Gumpoldskirchen
AUSTRIA/EUROPE
Tel:   +43 2252 606 277
Fax:  +43 2252 63 587
Email: rnowak@xxxxxxxxxxxxx 

------------------------------------
CONFIDENTIALITY NOTICE
------------------------------------
This email is intended only to be read or used by the addressee. The
information contained
in this email message may be confidential information. If you are not
the intended recipient,
any use, interference with, distribution, disclosure or copying of this
material is unauthorised
and prohibited. Confidentiality attached to this communication is not
waived or lost by reason
of the mistaken delivery to you.

If you have received this message in error, please delete it and notify
us by return email or
telephone Austrian Gaming Industries GmbH +43 2252 6060. Any email
attachment may
contain software viruses which could damage your own computer system.
Whilst reasonable
precaution has been taken to minimise this risk, we cannot accept
liability for any damage 
which you sustain as a result of software viruses. You should therefore
carry out your own
virus checks before opening any attachments.


>>> Sreekanth N nampoothiri <sreekanthn@xxxxxxxxxxxxxxx> 09/08/06 6:54 
>>>
  Hi All,
 
            What could be the rule of thumb while designing a
multilayer
board with HighVoltage.
            For eg:- If I have 1KV in one  layer, what could be the
required
minimum prepeg thickness to the next layer? 
            And what could be the   voltage & current carrying capacity
of
FR4 .
 
 BestRegards,
 Sreekanth N Nampoothiri
 

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list 

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ 

List technical documents are available at:
                http://www.si-list.org 

List archives are viewable at:     
                http://www.freelists.org/archives/si-list 
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu 
  



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu