FreeLists / si-list / [SI-LIST] Re: Testing chips with system level specs

["Conway, Patrick R (Houston)" <p.conway@xxxxxx>]

David-

        In your message you write:

<q>      ...obtained while holding a tool in my hand.=20
I used myself for these discharges up to 8 kV - a=20
rather unpleasant ESD voltage. I was standing on a=20
metal mat, if I remember correctly.=20

As all of this was done at another employer, ...
<q>


Congratulations on leaving that position.
        Hope you found a new employer that uses test=20
        equipment, instead of the employees, for=20
        high-voltage testing.

:)


Best Regards,

Patrick.
p.conway@xxxxxx
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu