|
[si-list]
||
[Date Prev]
[09-2004 Date Index]
[Date Next]
||
[Thread Prev]
[09-2004 Thread Index]
[Thread Next]
[SI-LIST] Re: long distance calbe data transferring
- From: SreejaPillai@xxxxxxxxxxxxxx
- To: yafei_bi@xxxxxxxxx
- Date: Thu, 9 Sep 2004 15:10:27 +0530
What about T1/E1
Up to 18,000 feet 1.544 Mbps (T1)
16,000 feet 2.048 Mbps (E1)
Regards,
Sreeja S Pillai
Engineer - Hardware
SCM Microsystems ( India ) Pvt. Ltd.
***********************************************************************=
*******
=
=20
Yafei Bi =
=20
<yafei_bi@xxxxxxx To: Georg.Ramsch@t=
-online.de, wangyf@xxxxxxxxxxx =20
om> cc: si-list@freeli=
sts.org =20
Sent by: Subject: [SI-LIST] Re: =
long distance calbe data transferring =20
si-list-bounce@fr =
=20
eelists.org =
=20
=
=20
=
=20
09/09/2004 05:43 =
=20
AM =
=20
Please respond to =
=20
yafei_bi =
=20
=
=20
=
=20
Hi,
VDSL spec at 13000ft =3D 4km.
but by looking at the following:
http://www.ikanos.com/solutions/pdfs/dmt_benefits_oct02.pdf
page 12, the up/down stream throughput vs. distance,
it seems it is achievable for your bit rate.
regards,
Yafei
--- Georg Ramsch <Georg.Ramsch@xxxxxxxxxxx> wrote:
> Hallo, Wang !
>
> 1) Just a proposal: why do you not use standard DSL
> chip sets available
> in the market?
> There is a miriad of those from Infineon, Connexant
> etc. They offer a
> lot of development support.
>
> 2) see 1)
>
> 3) Simulation: ETSI regulations ( DSL: ITU G.992
> G.991 and others )
> give information about 7 different telecom cable
> types with
> their impedance over frequency and also stray
> parameters ( R',L,C').
>
> 4) see 1)
>
> On a US web site there is also a noise calculator
> for telecom cable
> occupied with
> POTS / ISDN / DSL technologies to estimate
> noise level and therefore BER ( Lets see if I find
> the link, it is
> already some years ago ).
>
> My 2 cents
>
> Georg
>
>
> wangyf@xxxxxxxxxxx wrote:
>
> >Hi, all
> >I=A1=AFm dealing with a project of transferring digital
> data via 7 km copper
> >twisted cable, the data rate is 510-kbit/s or
> higher, and BER needed is
> >1E-5 or lower. This must be a challenging task as
> the 0s and 1s are
> >smeared after they traveled through such a long
> way. My questions are:
> >1. What kind of code is best suited for the
> transfer.
> >2. I need equalization, but are there any proper
> equalizer for this?
> >3. How can I develop model for 7km copper twisted
> cable? Is there any
> >simulation tool for it?
> >4. One approach is using ADC to sampling the
> signal, and then use DSP to
> >enhance it. Is it a good method?
> >I want to have your helps, and thanks in advance.
> >
> >Yanfang Wang
> >Fast Electronics Laboratory
> >University of Science & Technology of China
> >E-mail: wangyf@xxxxxxxxxxx
> >Phone: +86-551-3603114
> >FAX: +86-551-3603114
> >
>
>------------------------------------------------------------------
> >To unsubscribe from si-list:
> >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in
> the Subject field
> >
> >or to administer your membership from a web page,
> go to:
> >http://www.freelists.org/webpage/si-list
> >
> >For help:
> >si-list-request@xxxxxxxxxxxxx with 'help' in the
> Subject field
> >
> >List FAQ wiki page is located at:
> >
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
> >
> >List technical documents are available at:
> > http://www.si-list.org
> >
> >List archives are viewable at:
> > http://www.freelists.org/archives/si-list
> >or at our remote archives:
> > http://groups.yahoo.com/group/si-list/messages=
> >Old (prior to June 6, 2001) list archives are
> viewable at:
> > http://www.qsl.net/wb6tpu
> >
> >
> >
> >
> >
>
>
>
------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in
> the Subject field
>
> or to administer your membership from a web page, go
> to:
> http://www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the
> Subject field
>
> List FAQ wiki page is located at:
>
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> http://www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages=
> Old (prior to June 6, 2001) list archives are
> viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages=
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|
|
