
|
[si-list]
||
[Date Prev]
[09-2004 Date Index]
[Date Next]
||
[Thread Prev]
[09-2004 Thread Index]
[Thread Next]
[SI-LIST] Re: Decoupling for PLL (continued)
- From: Salwasewing@xxxxxxx
- To: zhang_kun@xxxxxxxxxx, cgrassosprint1@xxxxxxxxxxxxx
- Date: Mon, 6 Sep 2004 15:14:02 EDT
target.comwrites:
just so happens that I have just been fighting a
> noise problem witha ferrite bead /capacitor combo.
> In my case it turned out that a low ESR ceramic cap
> was required rather than a large electrolytic.
>
> Could this be the problem..
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
|

|